Members

clalonde

Newbie From Kansas City

Joined: Apr 13, 2025

Last seen: Yesterday at 10:23 PM

Latest activity Postings About

- clalonde replied to the thread What’s a good shock.
  
  I put these kyb shocks on my truck not too long ago. I have a 1999 k2500.They seem ok. Rear shock...
  
  May 8, 2025
- clalonde posted the thread Steering wheel 1/4 turn off center in Stock Suspension + Bolt On Kits.
  
  I just replaced my steering box with a redhead. When I got it back together my steering wheel is about 1/4 turn to the right while...
  
  May 4, 2025
- clalonde replied to the thread Torsion bar removal.
  
  I just replaced the bushings in my lower control arm on a 1999 k2500. I was able to wiggle it off the torsion bar once the tension was...
  
  Apr 28, 2025
- clalonde replied to the thread GMT400 K2500, can you get the lower control arm off without removing the torsion bar?.
  
  I just replaced the bushings in my lower control arm on a 1999 k2500. I was able to wiggle it off the torsion bar once the tension was...
  
  Apr 27, 2025
- clalonde reacted to 1998_K1500_Sub's post in the thread Rag Joint Delete Steering Shafts with Like.
  
  All you need is the U-joint. If you want to buy the entire assy from Cunningham that's fine with me, but it's not necessary. See...
  
  Apr 24, 2025
- clalonde replied to the thread Rag Joint Delete Steering Shafts.
  
  I'm looking to do this shaft upgrade for my 1999 K2500 4x4 truck. For those of you that have done this and purchased the shaft from...
  
  Apr 24, 2025
- clalonde reacted to Misterman's post in the thread 1999 GMC K2500 4WD PICKUP Control arm bushings with Like.
  
  @Schurkey is the man for this. But id ask for PICTURES lol seriously tho. Pictures help alot. Is it at its final seating depth? 90%...
  
  Apr 17, 2025
- clalonde replied to the thread 1999 GMC K2500 4WD PICKUP Control arm bushings.
  
  I got them pressed in. Used some silicone lubricant and kept pushing. The people helping me out were nervous when the rubber bushings...
  
  Apr 17, 2025
- clalonde reacted to GoToGuy's post in the thread 1999 GMC Sierra K2500 Trim Height with Like.
  
  If you looked in the OE manual you had the information. In the first section " OA- 1 etc. " it list the model codes , first four...
  
  Apr 16, 2025
- clalonde reacted to Schurkey's post in the thread 1999 GMC Sierra K2500 Trim Height with Like.
  
  What vehicle do you have? Check with the service manual set for your vehicle, and the SPID sticker in the glovebox to determine the...
  
  Apr 16, 2025
- clalonde replied to the thread 1999 GMC Sierra K2500 Trim Height.
  
  Thanks for the replies I believe I have a K20743 with the 5.7. so id need the 6.2 inch height. I didn't understand that code breakdown...
  
  Apr 16, 2025
- clalonde posted the thread 1999 GMC Sierra K2500 Trim Height in Stock Suspension + Bolt On Kits.
  
  I know this z height/trim height question has been posted on here a lot, but I didnt see my specific question while reviewing the older...
  
  Apr 16, 2025
- clalonde reacted to GrimsterGMC's post in the thread Hello with Like.
  
  G'day from New Zealand, welcome to the site. There's an answer for every question in here so don't be shy to ask. How do you plan to use...
  
  Apr 14, 2025
- clalonde reacted to 98BlackSierra's post in the thread Hello with Like.
  
  I affectionally call pewter metallic "Old Man Tan." I love the color though :D Do you have any other photos? How many miles are on...
  
  Apr 14, 2025
- clalonde reacted to Cadillacmak's post in the thread Hello with Like.
  
  Welcome from Alaska, thats a nice truck.
  
  Apr 14, 2025
Show older items
Loading…
Loading…