Christian Steffen's latest activity
-
Christian Steffen reacted to Keeper's post in the thread Great White Buffalo (first post) with
Like.
I think Straub is the one who recommended an aggressive split on duration for bbc's doing heavy hauling... peaking at 4800 rpm with a... -
Christian Steffen reacted to Supercharged111's post in the thread Great White Buffalo (first post) with Like.
ABSOLUTELY go with a roller cam! Is your block roller ready? If not you'll need a retrofit, but flat tappet cams are garbage anymore...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
Working out my compression ratio today. Looks like I had guessed a little high. Came out to 8.6:1. I'm sure there's a margin of error in...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
I haven't picked another cam yet. I won't until I get into it and figure out my cr (hopefully this weekend). The vortec heads are more...
-
Christian Steffen replied to the thread Great White Buffalo (first post).Don't go with the peanut port heads, use the vortecs. As long as your tune is good a little extra CR is nothing to be scared of imo...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
I'm not sure how prevalent E-85 is my area. My biggest concern with E-85 and the reason I hadn't really considered it is because of...
-
Christian Steffen reacted to Sean Buick 76's post in the thread Great White Buffalo (first post) with Like.
I wouldn’t worry about adding cubic inches, the turbo will make up for that. I would for sure run the turbo before building a forged rod...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
I did the initial break in when I put the last cam in. I ran it at 2000-2200 for about 25-30 minutes. I don't think my neighbors...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
Thank you, this does make sense. Now that I have the engine out I can spend some time dialing everything in like it's compression ratio...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
Well I finally got around to pulling the engine. Haven't had a chance to dive in yet, but I will say the cylinder bores are in great...
-
Christian Steffen reacted to Great White Buffalo's post in the thread Great White Buffalo (first post) with Like.
It's been a stretch, but I finally had a chance to dive into the buffalo and diagnose the problem. Here it is, #7 exhaust.
-
Christian Steffen reacted to NickTransmissions's post in the thread Bowtie Brody's Namesake 96 454 with Like.
4L80E? If so, DO NOT INSTALL that HD2. Dual feed the direct clutch internally, drill feed holes per your converter stall and...
Members online
- 95YardArt
- OlSmokie
- Whit Hinton
- G1kon1wheel
- Nov93
- FknReaper
- Alteca
- Chuck_13
- tahoedude
- Pinger
- Caman96
- Crunch
- Roller85
- TXStepside
- 90sprobs
- grampadirt
- Motrhedx81
- La Cheyenne94
- Scooterwrench
- Jasondmx2
- DuallyCrew
- Aidan Kesler
- the_elegant_fox
- yevgenievich
- BH812
- Erik the Awful
- SAATR
- 0xDEADBEEF
- 618 Syndicate
- rick69
- GmChevy1995
- EricNeutel
- WhiteBurb97
- Erin
- warpig98
- PM18S4
- Bachert24
- man-a-fre