Recent content by Cheyenne

  1. Cheyenne

    Coolant Leak. Need help locating

    That's an awesome write up. I'm definitely going to use that for references when I do it!
  2. Cheyenne

    Coolant Leak. Need help locating

    Hey everyone thanks for all the help. It was the weep hole. I was able to get a better look of it and that's exactly where it was coming from once I knew what I was looking for. Changed it and it's been good ever since And now that I've had the pleasure of taking the clutch fan off you know I'm...
  3. Cheyenne

    Coolant Leak. Need help locating

    Hey guys. Thanks for the info, I'm going to check the weep hole on the water pump. I know of the possibility of it being an intake gasket but I doubt it because I just replaced them with Felpro ones a couple months ago and made sure to fill the spots where the intake meets the heads and block.
  4. Cheyenne

    Coolant Leak. Need help locating

    As title says I need help locating what exactly is leaking. 5.7 Vortec, Coolant is leaking off of the Lower rad hose but it is NOT the hose. It was previously replaced, so it is leaking out of something and dripping down the hose and leaks off of the lowest point VERY quickly, a straight...
  5. Cheyenne

    P0302 misfire, can't fix it

    You'll want to start a new thread probably for that
  6. Cheyenne

    P0302 misfire, can't fix it

    No. It hasn't been fixed. I wasn't aware of that. I put in New intake gaskets, new injectors and intake manifold. Along with plugs, wires, cap, rotor. 1998. 350 Vortec I wonder that too. I have a rough idle only misifire on cylinder 2
  7. Cheyenne

    Valve cover gasket opinions

    Yeah it was hard for me to get on but once I did they stayed put. Nothing extra was needed. I did both valve covers (original covers)
  8. Cheyenne

    EGR Delete - Will I benefit?

    Yea I'm going to as soon as I can. It's in the garage getting a new suspension so it's not being driven
  9. Cheyenne

    Valve cover gasket opinions

    I used the blue Felpro ones. They were tough to get on at first but I never had any issues after that.
  10. Cheyenne

    EGR Delete - Will I benefit?

    Yeah I'm going to, I just cant get it out of the manifold. Yes it's stock manifolds. It just makes me wonder, if that's happening from not having the tube hooked up, would the same thing or similar happen with the whole delete?
  11. Cheyenne

    EGR Delete - Will I benefit?

    Not sure if this is relevant but I had to break my egr tube to get to my intake off and I've yet to replace it... I've had 02 (bank 1) code ever since and some crap shoot out the exhaust on that side
  12. Cheyenne

    1998 K1500

    I did the lower intake gasket and upgraded my fuel injectors to the MPFI system from Delphi hoping to fix my misfire. Also cleaned out a lot of gunk and build up while I was in there. During the process of taking apart the intake, I had to twist off the EGR tube because it was seized and...
  13. Cheyenne

    Won't start, has no crank and no click

    Hey just wanted to let you know it was a ground underneath the pulleys... it was on there but I took it off and reconnected it and boom fired up
  14. Cheyenne

    P0302 misfire, can't fix it

    I did a compression test before and it came out fine
  15. Cheyenne

    P0302 misfire, can't fix it

    Hey so I had a misfire in cylinder 2 Did plugs, wires, cap, rotor and didn't fix it... So I did the intake gasket, the upper intake and put in Delphi fuel injector upgrade. On the old injector, the tip on cylinder 2 was visibly burnt. Finally got it started again today and after a while the...
See more

Latest posts

Members online

... and 1 more.
Total: 980 (members: 51, guests: 929)

Forum statistics

Threads
64,187
Messages
1,388,570
Members
51,117
Latest member
rayruiz87

Share this page

Top