Recent content by bugdewde

  1. bugdewde

    GMT400 - Community Scan Tool

    See post 145 - 150. Are you putting the bare wires into the correct spots in the diagnostic port? I got it to brrrr momentarily, thinking it wasn't correct. Seems a moment is all that is needed.
  2. bugdewde

    GMT400 - Community Scan Tool

    It does OBD 1 or 2, depending on which cartridge you hook to the scanner.
  3. bugdewde

    GMT400 - Community Scan Tool

    I'm sending this thing out to next on list on Friday. @Illbedipped , shoot me you're address. No real luck ... I show no abs codes, but can't seem to get the actuators to cycle and stay on to bleed at the wheels. Only when I hook up the multi-1 or jumper the ports A & H. Just a...
  4. bugdewde

    GMT400 - Community Scan Tool

    @studigggs ... I got the multi-1 adapter out if the mail this morning. I'll give it a shot this evening when I get off work. Does it go into the port on the 'burban or the MT2500? The loose wires with male ends seem to go into the vehicle port and the harness adapter goes into the device...
  5. bugdewde

    GMT400 - Community Scan Tool

    Go back a page or two .... until you see the list. Copy it, or "quote" it and read the posts after the list, adding requested names up to the current post. Then post a new list with your name on it. Here's the latest post with the "list" before your request. Simply add your name to it and...
  6. bugdewde

    GMT400 - Community Scan Tool

    Wow!!!! That's awesome!
  7. bugdewde

    GMT400 - Community Scan Tool

    That would be awesome! Thanks so much. I just sent PM.
  8. bugdewde

    GMT400 - Community Scan Tool

    What I'm seeing ...... ..... Video MT2500 ABS Fail
  9. bugdewde

    GMT400 - Community Scan Tool

    Sadly, no ABS love for me and my '95 OBD1. It's working on engine stuff .... O2 sensors, IAC, Coolant temps, open/closed loop, idle speed, etc ..... but no ABS. The good news is there's no codes stored at all. Air bag, engine, etc... all good... and no check engine light or other lights on...
  10. bugdewde

    GMT400 - Community Scan Tool

    Scan tool arrived today!!! Going to do some reading on getting the abs to link up tonight. Hope to cycle my ABS brake solenoids this evening or tomorrow evening. With luck, I can bleed the brakes Thursday or Friday evening. @Illbedipped , you still next? Pic for content verification.
  11. bugdewde

    GMT400 - Community Scan Tool

    HopHead357 - bugdewde (me) - Illbedipped - Raycecar Looks like in next .... sending PM .
  12. bugdewde

    GMT400 - Community Scan Tool

    Ni9efingers ... I'm wanting to cycle my '95 ABS system, also. If you get any tips/ideas on getting it to work, I'd appreciate a little help on mine. That's all I wanted to use it for. According to my read of the thread, HopHead357 is next .... then me. Copied from my previous post: LTC is...
  13. bugdewde

    GMT400 - Community Scan Tool

    LTC is supposed to forward to N9nefingers. - HopHead357 - bugdewde (me) - Illbedipped - Raycecar I should only need it for 1 day .... to cycle my ABS solenoids to try and bleed my 95 OBD1 brakes. I don't believe there are any other issues with my Suburban (no other lights on dash). Good luck...
  14. bugdewde

    95 K2500 SUBURBAN ABS BLEEDING ?

    All new stuff ..... fancy red calipers are barely visible. Lol.
  15. bugdewde

    95 K2500 SUBURBAN ABS BLEEDING ?

    All done..... bled it a few times and its greatly improved. Activating the solenoids would probably make it even better. One issue was the steering damper taper didn't match ..... so my buddy just cut it and drilled and tapped it to accept the bolt.
See more

Latest posts

Members online

Total: 921 (members: 28, guests: 893)

Forum statistics

Threads
64,231
Messages
1,389,227
Members
51,176
Latest member
Hawn637

Share this page

Top