Recent content by BPR Speed

  1. BPR Speed

    Fuel Pressure Regulator Bypass

    Hey everyone, I'm looking to bypass my fuel pressure regulator on my MPFI assembly. Reason being is the fuel pressure use to be 58 psi at idle and raise from their accordingly for throttle input and boost. In the past that was around 58 psi to 65 psi. Now the regulator is maintaining a constant...
  2. BPR Speed

    Past Trades: 1981 K1500 to 1949 Plymouth Club Coupe

    Yes they didn't come in as K1500 my bad on the typo. I guess this truck would fall in the K20 platform but those didn't come in the 3/4 ton axels either for a half ton truck so split some more hairs there. The axles where indestructible though. I enjoyed that truck thoroughly.
  3. BPR Speed

    My Old SRT-4

    Be sure to tell you're brother if he doesn't want it to ride like a bag of bricks to stay away from coil overs. My old blue one had the "good" BC coilovers and it rode like crap. My red one is almost 100% stock and has a stock suspension and struts. Rides like a dream for a 4 door sedan.
  4. BPR Speed

    My Old SRT-4

    Like most cars, if they've not been abused by the youth and taken care of then they're great cars. Two years into owning mine the only thing it's wanted was a front right abs sensor. Been rock solid since, it's now 117,*** miles.
  5. BPR Speed

    My Old SRT-4

    This old lump of coal is my past 2003 SRT-4. I purchased it from a guy who had it built by a SRT-4 enthusiast in San Antonio, TX named PJB Werks. Pretty cool group of guys. I follow them on Facebook at times. They have some pretty nasty neons pushing past 800hp. This car when I purchased it was...
  6. BPR Speed

    Past Trades: 1981 K1500 to 1949 Plymouth Club Coupe

    It does still have the flat 6. The original owner wanted to put a Scat Pack Hemi in it and transform it into a resto-mod for his Father but ended up changing his mind. He had receipts for the car that I saw that totaled past $28K, Pearl Essence White paint, $10K in interior restoration and...
  7. BPR Speed

    Past Trades: 1981 K1500 to 1949 Plymouth Club Coupe

    Pictured are a few of my past rides. I had the 81' K1500 since I was 16, it was my first vehicle. I've restored it to it's pictured condition. Build list below...I winded up wanting something the Wife and kids could ride along and enjoy with me. Along came the 49' Plymouth! I fell in love with...
  8. BPR Speed

    Past Trades: 1981 K1500 to 1949 Plymouth Club Coupe

  9. BPR Speed

    HP Tuners

    I scrounged through HP tuner's website and found my answer. For those interested, the 0411 PCM can run with speed density. Supposedly the 98-99 LS1 engine file runs a speed density availability alongside a 24X set-up. I'll download that file once I purchase the HP tuners dongle ect. To run speed...
  10. BPR Speed

    Noise in my transfer case? 1998 K1500 Suburban

    I would get a bearing/race puller. There's no easy way to get that out. If you're concerned with damaging it, check to see if it's damaged. It may be better to leave it if it's looking healthy. That oil pump tab is what I remember going out and killing things. Did you have a replacement for that...
  11. BPR Speed

    HP Tuners

    I was able to get ahold of Lextech and get our PCM pin-out for the 96' truck to 0411 for $20. Next step is to do some research. I'm looking to run the truck on the 0411 PCM with HP tuners. I would like to run the engine off of speed density and a 3 bar MAP sensor and IAT sensor. Does anyone have...
  12. BPR Speed

    Performance help

    Are you looking to keep it fuel injected? If you ordered a vortec style 350 SBC I would re-install everything from the old vortec engine (intake up) and run that set-up. If the new engine has a larger duration cam from stock then you would be getting into the weeds of what you'll need to do...
  13. BPR Speed

    Noise in my transfer case? 1998 K1500 Suburban

    I had this exact same symptom happen to a 2000 escalade I owned back in 2012. Same problem too! Carrier bearing went out due to a common problem in a manufacturer defect. I forgot the exact issue but something about a retaining tab can break off and get up into the bearings causing premature...
  14. BPR Speed

    Fuel pump includes sending unit?

    Usually the hangar assembly can be purchased as a whole. It will come with a fuel pump already installed, and the fuel level sending unit. The Delphi line of parts work well for the GMT400 platform. I've purchase a new hanger from Delphi for my current 96' K1500. I swapped out the fuel pump for...
  15. BPR Speed

    I need to buy a scope...

    You can also look into used Fluke Biomedical scopo-meters if you want to invest in a quality piece. Even the 80's era scopes are pretty decent and the new ones will auto adjust for frequency and voltage. I use Fluke often when repairing medical equipment (my primary job). May not have the most...
See more

Latest posts

Members online

... and 19 more.
Total: 1,858 (members: 69, guests: 1,789)

Forum statistics

Threads
64,341
Messages
1,391,580
Members
51,452
Latest member
Swift

Share this page

Top