Blue11
Latest activity Postings About
-
-
Blue11 replied to the thread Blue11's 2000 K2500 CCSB (unnamed) build!.Alright, it’s been a few days without a whole lot of progress. I did 6 out of the 8 spark plugs, just haven’t had the time or motivation... -
Blue11 replied to the thread Blue11's 2000 K2500 CCSB (unnamed) build!.I decided not to sell, and instead put the money that would’ve gone to purchasing something else into this truck instead. Judging by...
-
Not sure if ur still undecided to keep or sell it. But I'd say keep it, inless you find another CCSB similar to urs in better condition...
-
Blue11 replied to the thread Blue11's 2000 K2500 CCSB (unnamed) build!.Alright, so I didn’t end up sending it with the valve cover gasket. I was too worried about it not being the right one and then having...
-
-
Blue11 replied to the thread 7.4 Bosch injector swap.One last update to finish this thread! Injectors seemed to have seated properly! I buttoned everything up and just finished taking it...
-
Blue11 replied to the thread 7.4 Bosch injector swap.I didn’t measure them, but they’re the exact same dimensions as the ones I took out of the truck. I feel like I’ve made some progress...
-
-
I just swapped out a set of yellow tops for some GM Genuines. Are yours exactly 3" long? Adding a pic of an old one. You can see where...
-
The design does not leave much room for error (or convenience for assembly), but it came out of there and it will definitely go back...
-
Blue11 replied to the thread 7.4 Bosch injector swap.Pictured here, you can see how the drivers side bank of injectors is seated fully both in the rail and the ports, however the passenger...
-
-
Blue11 replied to the thread 7.4 Bosch injector swap.Ford logo is cast into the yellow part of the injector body. “MHC” is cast into the same portion on the old ones- that’s why I thought...
-
-
The real deal ones made by Bosch for Ford have the Ford logo cast very cleanly into the yellow part of the injector body. I would assume...
-
Blue11 replied to the thread 7.4 Bosch injector swap.The passenger side injector is seated nicely, however the drivers side injector is seated with the o-ring visible. If I push that one in...
-
-
Blue11 replied to the thread 7.4 Bosch injector swap.Alright, some photos: The old injectors lined up The new (reman) injector New injector next to old. Dimensionally identical, and...
-
-
Blue11 replied to the thread 7.4 Bosch injector swap.I’ll double check shortly. I’m just getting caffeinated in preparation for the day. The issue seems to be less that they won’t seat...
-
The only time I had to swap out o-rings because they wouldn't seat, was when I used some Ford 19# yellow tops. Have you compared o-ring...
-
-
Loading…
-
Loading…
Members online
- Ngrou01
- DrMcBlarg
- ihaveatrucktodostuff
- 95burban
- John78
- Jesse L
- jtc2389
- Feral peasant
- 2dr95tahoe
- K496
- Awalter325
- Ztbrown1996
- Minn95Dually
- Outl4wAndy
- toolmakerson
- 1990_OBS_Rado
- kawiduckz
- 99xcss4
- Baastyler
- 99Yak
- ERS299
- Siopao
- 1998 K1500 Bubbles
- staabtown_hoodlum
- CrustyJunker
- Kenworthit13
- Nylo
- L31MaxExpress
- Noel11
- JR_101
- Austin52
- oefvet0708
- Just57
- aksavanaman
- BNielsen
- Wademo
- fancyTBI
- Gmcred4x4
- Bignasty77
- ballsofstihl
- 99tan99
- 1972c20
- greeneyes
- Jdmoon
- Clone
- navyboy65
- Komet
- lucifer666
- BeardedGod86
- Schurkey