Recent content by azmikep

  1. azmikep

    looking for a good radiator

    Great info on the Aluminum Radiators. I’ve never heard this before. I agree that changing coolant and keeping your eyes open that they’re fine to run. Someday when I win lotto and drop a all aluminum block 572 in there I’ll worry more lol.
  2. azmikep

    looking for a good radiator

    Performance Radiator 21 N 20th St, Phoenix, AZ 85034 (602) 462-9260 https://g.co/kgs/8uVeNK I’m very happy with my radiator from these guys. I’ve got a 90 GMC sierra 1500 5.7L
  3. azmikep

    Rear shocks twisting frame?

    I just did a 2” drop with $40 Amazon my 1990 GMC Shortbed measured 34 1/2” to the middle of the wheel on Passenger Side. The 34 1/4” pic was driver side. These were before pics For what it’s worth. No wrecks I’m aware of. Trucks been in my Family since new. 3rd pic is what worked out to be...
  4. azmikep

    Desperately need advice on rear ends.

    I just installed a Lockrite lunchbox style drop In locker in my 1990. I had 28splines in my axle. I counted vrs websites so it does matter 28 or 30 spline. Thru all the research and advice I got here I can say that unless you have to unbolt the ring gear from the carrier; everything is...
  5. azmikep

    Upgrade option feedback

    Following!
  6. azmikep

    Low oil pressure at idle?

    I’ve got about 15-20 psi at idle. Brand new motor. Was worries about oil pump screen or kink on oil tube during assembly. Runs fine good pressure on gas so I know guage works. Following
  7. azmikep

    Positraction vrs Locking Diff?

    I wound up going with a Powertrax LockRight. It was within my tool/ skill abilities. Besides directions super vauge and inaccurate; with the help of tech support (directions say you reuse your pinion shaft, you don’t, use new one in kit) it went smooth. Ratchets around turns. But when your on...
  8. azmikep

    hood insulation

    LINGDA 21.53 SqFT 10mm Heat... $41 on Amazon exactly one roll did my underside of my hood. Tossed all the push in style retaining clips. The adhesive is good on this brand and it has not started to come off at all. I’m happy.
  9. azmikep

    Looking for guidance

    Great. Thanks again!
  10. azmikep

    Looking for guidance

    I'm also looking to level my truck did the 2" drop shackle force you to get new shocks? or did you just need new ones? I ask because I just replaced all 4 with ac Delco shocks in past 6 months. Thanks in advance!
  11. azmikep

    Positraction vrs Locking Diff?

    I have heard good things about truetrac as well.
  12. azmikep

    Positraction vrs Locking Diff?

    No cam. Only my right foot!
  13. azmikep

    Positraction vrs Locking Diff?

    I don’t have a cam. It’s only got headers and air cleaner. I do have a hyper tech chip to go in…. Just waiting on gas prices to get a little better first. Great advice so far. Should have mentioned I have 275/60/15’s as well.
  14. azmikep

    90 Grey button no Max button Climate Control bad?

    Not sure if one has to do with the other but the red wire in left of the pic with the black connector is what must supply the radio with power. I only know this because I disconnected it to see what it powered. Judging by its gauge compared to the others, it is a main power source. Sucks about...
  15. azmikep

    Positraction vrs Locking Diff?

    Hi again Guys. 1990 GMC C1500 Shortbed mild 5.7 motor 4 speed auto tranny I’ve got a 10 bolt with 3.42 gears. I am looking for advice on either a locking differential or a posi rear install. I am currently in Florida where it seems to rain once a day for 15 mins. Is this something I can do...
Top