Recent content by Tan1998K2500

  1. T

    Can someone tell me what this part is on my 98 chevy c1500 ?

    You can also just use a 96 pressure line and not use the line that comes in the delete kit. That's what I did with my 98 because I also didn't like the idea of that extra line
  2. T

    Best fitting and quality replacement side mirrors

    You can also still order acdelco replacements. I did it for both of my truck's mirrors. Fit just fine, absolutely zero shake. The passenger side mirror is a little more difficult to find because they're usually on backorder but you can still buy them both new
  3. T

    Hydro boost Rebuild Went Bad

    I made the same mistake as you when I rebuilt my hydroboost unit. The bell shaped thing has a groove in it and the pedal rod goes into that groove. I accidentally assembled it with the pedal rod on top of the bell shaped thing and it would suck the brake pedal in all the way on start up
  4. T

    96 burb 7.4 misfire after 5.0 injectors

    As long as you have a line from your evap canister to your evap solenoid, it'll be fine. You don't really need that green valve. You honestly might be fine even without the line most of the times as that solenoid only opens occasionally Tbh, when it comes to timing advance and stuff, I dont...
  5. T

    96 burb 7.4 misfire after 5.0 injectors

    I do believe those should be connected. After some researching, the suburbans have a heater control valve for the rear a/c and heat and it's vacuum operated off the manifold. Which would explain why my truck doesn't have that connection or that line. So if you can, connect the line
  6. T

    Blueprint 383 crate motor?

    I'd definitely recommend both sides, if one went, the other is probably close as well
  7. T

    96 burb 7.4 misfire after 5.0 injectors

    The green check valve is a pressure testing location for the evap system, nothing connects to it unless you're pressure testing. Do you have a vacuum brake booster on your truck by any chance because that might be it. I don't have a connection point there or on the firewall but I have...
  8. T

    Blueprint 383 crate motor?

    https://www.jegs.com/i/Chevrolet+Performance/809/19433037/10002/-1?gad_source=1&gclid=CjwKCAiA29auBhBxEiwAnKcSqghDCER-SwvBK30QUmkLMMbWo1ImZr2ewkzpWggxefkVHDM7aCfhVBoCEwIQAvD_BwE As an alternative, Chevy does actually make a direct replacement 383 for the L31. But, depending on how long the...
  9. T

    96 burb 7.4 misfire after 5.0 injectors

    This is the intake side of the PCV system on the right side of the engine, you definitely need that elbow there otherwise your engine and intake manifold will just suck in all sorts of air that it shouldn't be This is the outlet side of the PCV system with that plastic hose with two rubber ends...
  10. T

    Manual Cargo Light?

    I know it's been over a year and I'm just now seeing this. I also went out to my truck and took pictures so you can see everything so hopefully it helps. So that white wire that is capped off is the original ground for the cargo lamp and it goes into the A pin on the connector. The black wire...
  11. T

    P0440 Code Tip

    Ironically, I had done the same thing with my truck. I forgot why I unplugged the evap solenoid but I did. Had very intermittent p0440. I replaced the valve on the manifold thinking it was going bad because it didn't look the best anyways. Very shortly after, I got the code again. I looked...
  12. T

    Alternator/tensioner bracket

    I know we all love pictures so I took a picture of the 2 brackets side by side so everyone can see the difference between them as well as the tensioner style. The swap was pretty straight forward though. Only problems I ran into is I had to disconnect the lower rad hose (I really didn't want too...
  13. T

    Alternator/tensioner bracket

    I appreciate it, I was able to get a yard in OK to send a bracket for a reasonable price
  14. T

    Alternator/tensioner bracket

    I may have to explore that way, thanks for letting me know! I thought they all pretty much died from out here. I can't believe that worked for you, it seems like getting the required leverage would be impossible. But that may be what I have to try next time
  15. T

    Alternator/tensioner bracket

    We do have them, they're just filled with gmt800s and newer. Even gmt400s aren't really on the road out here. I think it's just because of how close I am to the coast being the Hampton roads area but not entirely sure. We don't salt as we never get snow or anything ‍♂️
See more

Latest posts

Staff online

Members online

... and 15 more.
Total: 1,708 (members: 65, guests: 1,643)

Forum statistics

Threads
64,249
Messages
1,389,859
Members
51,240
Latest member
Baelfor

Share this page

Top