Tan1998K2500's latest activity
-
TTan1998K2500 replied to the thread Can someone tell me what this part is on my 98 chevy c1500 ?.You can also just use a 96 pressure line and not use the line that comes in the delete kit. That's what I did with my 98 because I also...
-
TTan1998K2500 reacted to someotherguy's post in the thread Best fitting and quality replacement side mirrors with
Like.
If you can get OEM it's absolutely the best way to go. I haven't seen an aftermarket copy of the factory black plastic folding mirror... -
TTan1998K2500 replied to the thread Best fitting and quality replacement side mirrors.You can also still order acdelco replacements. I did it for both of my truck's mirrors. Fit just fine, absolutely zero shake. The...
-
TTan1998K2500 replied to the thread Hydro boost Rebuild Went Bad.I made the same mistake as you when I rebuilt my hydroboost unit. The bell shaped thing has a groove in it and the pedal rod goes into...
-
TTan1998K2500 replied to the thread 96 burb 7.4 misfire after 5.0 injectors.As long as you have a line from your evap canister to your evap solenoid, it'll be fine. You don't really need that green valve. You...
-
TTan1998K2500 replied to the thread 96 burb 7.4 misfire after 5.0 injectors.I do believe those should be connected. After some researching, the suburbans have a heater control valve for the rear a/c and heat and...
-
TTan1998K2500 replied to the thread Blueprint 383 crate motor?.I'd definitely recommend both sides, if one went, the other is probably close as well
-
TTan1998K2500 replied to the thread 96 burb 7.4 misfire after 5.0 injectors.The green check valve is a pressure testing location for the evap system, nothing connects to it unless you're pressure testing. Do...
-
TTan1998K2500 replied to the thread Blueprint 383 crate motor?.https://www.jegs.com/i/Chevrolet+Performance/809/19433037/10002/-1?gad_source=1&gclid=CjwKCAiA29auBhBxEiwAnKcSqghDCER-SwvBK30QUmkLMMbWo1I...
-
TTan1998K2500 replied to the thread 96 burb 7.4 misfire after 5.0 injectors.This is the intake side of the PCV system on the right side of the engine, you definitely need that elbow there otherwise your engine...
-
-
TI know this is an old thread, but I think I'd like to do this too. Subscribed to help myself remember, and I'll let everyone know how...
-
TTan1998K2500 replied to the thread Manual Cargo Light?.I know it's been over a year and I'm just now seeing this. I also went out to my truck and took pictures so you can see everything so...
-
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- 99xcss4
- Remodelmaster
- nlarson
- Alteca
- Orpedcrow
- Whiterado
- scott2093
- Caman96
- Aidan Kesler
- RolandoLowko
- johnckhall
- someotherguy
- Road Trip
- Tbuttion
- Knuckle Dragger
- kennythewelder
- John Moore
- CumminsFever
- TXStepside
- Janesy
- offroadtahoe
- Lincoln7
- 1998_K1500_Sub
- caminonut
- Johnny Hirt
- Supercharged111
- fancyTBI
- pichaelsux
- Andrew Ralph
- Scooterwrench
- man-a-fre
- solaralexx
- SNCTMPL
- Lowsport14
- spoisel
- 89GMCJOHN
- heyitzjoel
- 0xDEADBEEF
- Victorlzx
- BNielsen
- Daly
- Leeztruk
- termite
- yyoddball
- 9812VDuslly
- Claymore877