Hope something good comes from it. I too would like to add my radiator oil cooler again. No more space in front to add an aux cooler with my whipple's heat exchanger.
Thanks for the pictures. Any more details. What engine mounts used? Are the speed engineering LT headers made for the 99-07 gmt800 trucks or the later 08-13 gmt900 trucks? Thanks
My 99 tahoe originally had AIR injection. It only runs for 30 seconds on start up. You can just unplug it, remove all the plumbing and cap the ports on the headers if you do not need it to pass smog. There werent any long tube headers back then that had connections for AIR injection so i took a...
My 1999 2 door tahoe has been off since new. Sticks out more on the drivers side. The axle is about 3/8" off center from the body. I have seen other 99 tahoes with similar issues and plenty of suburbans. I had brought it to the attention of my dealer back in 2000 but they claimed they are all...
Many have swapped to the mercruiser vortec mpfi manifold but those are hard to come by now. I used to run one with my old whipple setup and 411 pcm 12 years ago. Info can be found at the old pacificp forum. The forum is dead but the info is still there. Thats where the marine intake was started...
The steering gear boxes are also different between the 96 non-evo gears and the 98-99 evo equiped gears. I believe some 97 might gave had evo too but no 96s. If you bypass the evo, you will have very assisted steering. This is how I have been running mine until i get a new box from companies...
Im running 20x8.5 Black Rhino Pondora wheels with +45 offset in the front and +30 in the rear to help eliminate the front wheels sticking out too much on the my lowered 4wd tahoe.
Rear wheels in the picture are 20x8.5 Boss 330s. I hadnt swapped the pondoras on the rear yet. Tire size is 295/45R20.
Any updates on this? I have hit the 50 post requirement and I've been a member from the early days. I have a couple things I would like to post in the for sale section. Thanks