Recent content by 91bbc

  1. 9

    Brake Problems...Please Help!

    Yeah not going back there. They had it for two weeks, charged me $300, and now the truck it worse than when I took it. I parked it for a couple weeks after I got it back and it's too late to go in there guns blazing. Lesson learned. I'm going to replace the master and get her bled.
  2. 9

    Brake Problems...Please Help!

    I tried it and it didn't change anything. If i pull the vacuum hose/check valve after the truck sitting over night I can hear plenty of vacuum. I did a few different test and it seems the booster is fine.
  3. 9

    Brake Problems...Please Help!

    It looks like they spilled brake fluid all over the place when they bled the brakes. It wouldn't surprise me.
  4. 9

    could this be the cause of my problem? is it safe?

    I think switching over to hydro is a bit of stretch. But a new master is definitely in the works. I'm just not sure about the booster and abs. Maybe the master is fine, and the problem is just the way they bled the brakes.
  5. 9

    could this be the cause of my problem? is it safe?

    Yep they are idiots and ripped me off and I don't want to take it back. I live up a tight canyon roads with blind turns. How do I fix this thing? I have to drive 1,600 miles possibly towing 18,000 pounds next month.
  6. 9

    could this be the cause of my problem? is it safe?

    So I took it to the shop and they used a smoke machine and used starting fluid to try the find the leak. They could not find it. They replaced the iac and it helped smooth things out a lot. Dropped the idle by 100 (idles at 1k now). They did not hook up the truck to a computer, and I dont have...
  7. 9

    Brake Problems...Please Help!

    I recently got my brakes "flushed" (I think they just bled them since I can see stuff floating in the fluid). They felt ok at first, but now I'm having a few problems. 91 c2500 8600 gvwr 1) when I pressed the brakes the brake light comes on, but not as bright as it does when I use the parking...
  8. 9

    GMT-400 truck small parts galore.....bolts,brackets,tow hooks..mirrors,hubcaps,ect...

    Do you have the tape deck with the equalizer that would be found in a 91?
  9. 9

    Misc. GMT400 parts

    Do you have a tape deck with equalizer?
  10. 9

    1990 C1500 ABS (RWAL) removal.

    How did it go? I have the same thing.
  11. 9

    could this be the cause of my problem? is it safe?

    I don’t have a scan tool for obd 1. I think your right about keeping it simple though, I’m just going to take it to a shop and let the pros figure it out.
  12. 9

    could this be the cause of my problem? is it safe?

    is there any risk of starting a fire with that?
  13. 9

    could this be the cause of my problem? is it safe?

    The pvc valve grommet is definitely leaking. I can see oil coming out of it, and when I plug the pvc valve with my finger the idle drops about 100-200rpm. I'll order a new one today. Also, I did the iac relearn (bridge a+b pin, wait, disconnect iac, adjust butterflies to about 500 rpm, shut...
  14. 9

    could this be the cause of my problem? is it safe?

    I tried holding down the pedal before starting to see if pedal goes down, it does not. I tried holding pedal 30 seconds after shutting off engine, and it stayed the same. I tried pumping the pedal while engine not running, and it built pressure. I pulled the vacuum line off the booster after...
Top