DeucesAllin
OBS Enthusiast
so...all the info i posted. thx lol
Sent from my SM-J700P using Tapatalk
Sent from my SM-J700P using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
so...all the info i posted. thx lol
Sent from my SM-J700P using Tapatalk
Thanks, yeah that's 6.25 on a 10" wheel in back. I ran it for years with 8.5" wheels with a 5.5" backspace...
Thanks, yeah that's 6.25 on a 10" wheel in back. I ran it for years with 8.5" wheels with a 5.5" backspace, even when it was an inch or so lower all around, same size tires on rear.
You must be registered for see images attach
Richard
Truck's been gone for 3+ years now, couldn't tell you.Details/specifics of tires and wheels.
How far from the springs was it?
Im a stepide. fenders trimmed alo ready. next step is spring relocation.. im having wheels made anyway...maybe 15 x 14 is possible.. if centere properly i can move to wrinkle walls easy later on.
Pretty much what I recall about 4WD vs. 2WD on the 9.5" 14 bolt but no exact measurement on hand.I know that a 14SF from a 4wd is about 3" wider than a 14SF from a 2wd. A 4wd 10-bolt falls somewhere in the middle of this.
When I swapped my 10-bolt for a C2500 14SF it was narrower...
Looks great man... what paint?You just need the 2500LD u bolts. I did mine that way. I have pictures.
Sent from my iPhone using Tapatalk