Post your lifted 2wd's!

[oohunter04oo]

I stole the idea from FSC and i figured since there are several lifted 2wds in this forum they could post pics of there setup and all 2wd lifted questions could be asked here!

 

[oohunter04oo]

Year: 1997
Make: Chevrolet
Model: Silverado C1500
Gear size: Yukon 4.11's and a G80 (with a Z71 rearend)
Tires: 285/70/17 BFG Rugged Terrains
Wheel Size: 2010 NNBS 17's
Lift kit size and Brand: 4" Rough Country spindle lift
Coil Spacers: None
Wheel Spacers: 1/4" front and 1.5" rear
Lift Blocks: 2" nbs block
Add-A-Leafs: None
Body Lift: None
Aftermarket Bumpers: None
Fender Height Measurements: 37 Front & 37.5 Rear
Any fender or body trimming needed?: Zero trimming & zero rubbing
Extra Comments: used Z71 rearend to widin track width with the front. also used light duty 6lug rotors in the front.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

--PRICES--

Tires--$972 (discounttiredirect)
Rims--$300 (CL)
Spindles--$340 (roughcountry)
Rearend--$250 (junkyard)
Rotors & Bearings--$120 (advanced auto)
1/4in spacers--$30 (autozone)

 

[frito-bandito]

This is gonna be a cool thread, makes me wanna start looking at lifts!

 

[95C1500]

If you get the 4" RC spindle lift, you, oohunter04oo, and I will be the same....kinda

 

[Mean Green]

Sub'd for pics of awesome cleaness of lifted 2wds!

 

[bluex]

I will post my buddies '95 for him since hes never on here.

Year: 1995
Make: Chevrolet
Model: Silverado C1500
Gear size: 3.42's with open dif
Tires: 33/12.5/15 Dakota Definity AT's
Wheel Size: 15x8 front 15x10 rear
Lift kit size and Brand: 4" spindle lift
Coil Spacers: None
Wheel Spacers: None
Lift Blocks: 4" rear block
Add-A-Leafs: None
Body Lift: 3"
Aftermarket Bumpers: None
Fender Height Measurements: (will get later)
Any fender or body trimming needed?: Trimmed valance and a little on the bumper also. I dont think as much would have been needed if he had used the 8" rims up front first.
Extra Comments: Always gives me crap about his truck being higher.

His thread:http://www.gmt400.com/forum/showthread.php?9850-My-1995-ECSB-2WD-lifted

These pics are one 15x10's all the way around. We didnt measeure the backspacing on these.

These are on the 15x8 fronts and 15x10's rear. 3.75" backspacing on all, same tires.

You must be registered for see images

You must be registered for see images

With my Z71...

You must be registered for see images

 

[oohunter04oo]

bump i know theres a few more on this site.

 

[MOBS]

4/0 lift

Year: 1996
Make: GMC
Model: Sierra C1500
Gear size: 3.73 with open diff
Tires: 235/75/15 Firestone FR380
Wheel Size: Stock 15x7 steelies
Lift kit size and brand: 4" McGaughy's spindle lift
Coil Spacers: None
Wheel Spacers: None
Lift Blocks: None
Add-A-Leafs: None
Body Lift: None
Aftermarket Bumpers: None
Fender Height Measurements: 11" Front, 6" Rear
Any fender or body trimming needed?: Had to remove steering bump stops, they hit the brake line connection on caliper.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[oohunter04oo]

Had to remove steering bump stops, they hit the brake line connection on caliper.

I also had to do this, didn't know it and i backed out the shop, turned and hit the brakes and they went to the floor. i almost ran into a tractor!

 

[FastOrange]

Hunter, how much do you have into that lift setup, like just the blocks and spindles, REALLY considering this on my '96