VIKING_MECHANIC
GMT 400 obsessed Swede.
So I bought these housing a few years ago with the intention of doing a HID setup, but have since abandoned the HID idea. This kit came with both headlamp, signal/park and the side marker housings. I am running the signal housings and really like how it looks, so I want to install the headlamps now.
Question is;
1) can I run LED in these housing, because from what I understand LEDs need special housings to project the beam correctly.
2) for now, I will most likely run halogen, so what would be a good way to take apart the housing to remove HID reflector(deflector?) Or should I leave it in for the LEDs?
The lens is glued/sealed to the housing with silicone or something similar. I imagine a heat gun may get it apart but not entirely sure.
Question is;
1) can I run LED in these housing, because from what I understand LEDs need special housings to project the beam correctly.
2) for now, I will most likely run halogen, so what would be a good way to take apart the housing to remove HID reflector(deflector?) Or should I leave it in for the LEDs?
The lens is glued/sealed to the housing with silicone or something similar. I imagine a heat gun may get it apart but not entirely sure.
You must be registered for see images attach