1998 3500 crew/longbed build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

themeec

Newbie
Joined
Sep 15, 2022
Messages
33
Reaction score
81
Location
Boise, ID
It is not wired. I pulled a harness from a suburban. You'll have to drop the dash down cause harness runs across top of firewall just below windshield. And the harness is plug n play
I was wondering about that. Would the doors from a Suburban/Tahoe work on the crew cab as well? Would make my hunt for donor doors/wiring way easier, if that were the case.
 

someotherguy

I'm Awesome
Joined
Sep 28, 2013
Messages
9,795
Reaction score
14,155
Location
Houston TX
I’ve been looking for a red suburban to do a door switch. So I guess I need some wiring harnesses too.
Is your existing door damaged? There's no difference between a manual window and power window door, so if your door is good you don't need to swap the whole thing. You just swap the inner door module (some refer to it as a "door card") - the sheetmetal piece inside that holds the window regulator. Fairly simple operation.. easier than pulling the '95-up dash to run the wiring harness, I can assure you. ;)

Richard
 

themeec

Newbie
Joined
Sep 15, 2022
Messages
33
Reaction score
81
Location
Boise, ID
Picked up a set of Tahoe front doors in nice condition for the front, got a bead on some Suburban ones for the rears, hopefully snag those this weekend. The Tahoe part-out mentioned someone was coming for the dash plastics and instrument cluster, so he'll ping me if they don't take the wiring harness because that would def save me some work when coming to get it haha.
You must be registered for see images attach
 

Attachments

  • IMG_0486.JPG
    IMG_0486.JPG
    224.4 KB · Views: 9

fancyTBI

Some of my trucks run and drive
Supporting Member
Joined
Oct 7, 2018
Messages
2,294
Reaction score
6,156
Location
Northern IL
Picked up a set of Tahoe front doors in nice condition for the front, got a bead on some Suburban ones for the rears, hopefully snag those this weekend. The Tahoe part-out mentioned someone was coming for the dash plastics and instrument cluster, so he'll ping me if they don't take the wiring harness because that would def save me some work when coming to get it haha.
You must be registered for see images attach
Know that look all too well. When I picked up my C2500 the first thing I did was pick up some rust free doors.
 
Top