Cadillac Bob
Slammin original 4x4 Cadillac doors!
Yup I just clarifying why I didn’t name regular people names lol but a description of direction would still be nice. I mean ultimately he could name it “wild thang” after ole tiger blood!!! Lol
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
NICE!!! As for names Silveramo, lol. Back in the day of the EVH truck, some outfit had a kit to put a vetteIRS under OBS. Kit was 600 bucks. Think it was styling concepts. Sorry for dating myself.I’ve been taking some measurements and it looks like the factory gas tank will clear the subframe so I do not need a fuel cell. I might still raise the tank an inch or two for extra ground clearance. I would be down to about 4-5” of ground clearance if I do not raise the tank. I am thinking I will need to cut some of the bed out for tire to bed clearance as I only have about an inch currently and the irs will reduce my track width by about an inch so it will be close.
You must be registered for see images attach
Rick Dobbertin is making kits to put Corvette IRS in other cars,NICE!!! As for names Silveramo, lol. Back in the day of the EVH truck, some outfit had a kit to put a vetteIRS under OBS. Kit was 600 bucks. Think it was styling concepts. Sorry for dating myself.
Yes,but without the driveshaft. He desined it to make a muscle car midengined. Imagined med engined Chevelle! It was in hot rod magazine 3/4 years ago. Sorry to hijack. I mave have an old article about the vette irs. I will look through my stuff this weekend.Rick Dobbertin is making kits to put Corvette IRS in other cars,
Could you send pictures of this truck or do you know where I can find pictures? I would love to see how u did it and how it came out.I know they’re different trucks. But I did an IRS in my 2008 Silverado for the 2008 SEMA show. I used parts from an 06 GTO. I beefed up the axles and shortened them because i ran the first Raceline 24x14. My buddy Steve (Steve McGaughy) just helped me beef up everything and he builds for himself high end sand rails. So we just follow suit and used 4x4 front spindles in the rear.
The Boyd / Van Halen truck was IRS out off a C4 rearend. It’s not hard. Plus mine was bagged and you don’t even have to lift bed floor. Still had to tub. it’s was cool cause the truck had a little camber in the rear when laid out. People would trip on it.
Yeah. I’ll try and post on here. A Lot of the build pics are on an old phone and computer.Could you send pictures of this truck or do you know where I can find pictures? I would love to see how u did it and how it came out.