1997 gmc k2500 burban

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Does not look like much change, but a lot of work happening. More wiring, fuel tank is in, passenger header and starter. Belt is 1" longer than stock.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Filter and exhaust mocking up. I wanted to try and use stock filter housing, but to save time just going to be a hot air intake for now.
You must be registered for see images attach
You must be registered for see images attach
 

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
This might help someone. Ls3 crank sensor wiring have if using standard ls3 harness needs to be modified when using 08 v6 crank sensor for 58x conversion on a gen 6 bbc. Wires A and C swap places.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Last edited:

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
934
Reaction score
1,505
Location
TX
Was ready for a first test fire, just to find one of the injectors leaking at the extension that it was supplied with. Have to pull the intake back off.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Last edited:
Top