Phantom dually help

[Artinaudio]

Greetings all,
So I remember seeing a truck way back in 93 at truckin nats. Pigeon Forge., it was a phantom dually. I was only into mini's back then so I never asked deets. Few questions.

Truck is 94 gmc 1500 sclwb
1) anyone done this? Pros/cons?
2) I'm planning 4/6 traditional drop so possible wheel sizes? I was thinking stay 15"
3) decent aftermarket fenders?
4) has anyone narrowed fenders?

Any info at all would help.

 

[618 Syndicate]

Here's a write up that might help.

Randal's GMT400 "Phantom Dually" Build

This is a Father and Son Project called The Green Dickle GMT400 Phantom Dually. Its a 1994 Chevy 1500 Series Extended Cab Short Wheel Base GMT400 Truck. Yes, there is nothing wrong with your eye sight, This truck is Florescent Green. We will be installing a conversion kit to make this truck a tru...

www.soundsolutionsaudio.com

Found another one as well.

I want to make a Phantom Dualley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

I want to make a Phantom Dualley The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board

67-72chevytrucks.com

 

[MrPink]

so it had a super single in the rear? which would have been a SRW 14B swapped into a DRW truck with a really wide/low offest wheel.

 

[Artinaudio]

so it had a super single in the rear? which would have been a SRW 14B swapped into a DRW truck with a really

so it had a super single in the rear? which would have been a SRW 14B swapped into a DRW truck with a really wide/low offest wheel.

Yes a single tire, reminded me of a big tire drag car. I wouldnt want so much sidewall but tire options are much greater now.

 

[Artinaudio]

Here's a write up that might help.

Randal's GMT400 "Phantom Dually" Build

This is a Father and Son Project called The Green Dickle GMT400 Phantom Dually. Its a 1994 Chevy 1500 Series Extended Cab Short Wheel Base GMT400 Truck. Yes, there is nothing wrong with your eye sight, This truck is Florescent Green. We will be installing a conversion kit to make this truck a tru...

www.soundsolutionsaudio.com

Found another one as well.

I want to make a Phantom Dualley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

I want to make a Phantom Dualley The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board

67-72chevytrucks.com

Thanks for the links, I have an actual dually just laying around but not interested in all that for this truck.

 

[618 Syndicate]

So what are you wanting to do?

 

[Artinaudio]

Trying to set up single wheel phantom dually on my 94 c1500, want to use 15" wheels but not sure about offset, tire size ect.

Would like a decent sidewall on tires.

I'm going to use 4/6 traditional drop.
Truck will never need to haul anything other than passengers.

I'm leery of adaptors & spacers but if it's the only way then I guess it's what needs to be done.

 

[618 Syndicate]

Trying to set up single wheel phantom dually on my 94 c1500, want to use 15" wheels but not sure about offset, tire size ect.

Would like a decent sidewall on tires.

I'm going to use 4/6 traditional drop.
Truck will never need to haul anything other than passengers.

I'm leery of adaptors & spacers but if it's the only way then I guess it's what needs to be done.

How will you get the wheels to the outside of the flares without spacers? Or are you just wanting to run a really wide wheel and tire setup? What are you going to use for flares?

 

[Stumpy]

Most of what I've seen, is 15x14 wheels, with a 29x18x15 tire. Not seeing any back space info for the wheels though.

 

[Artinaudio]

How will you get the wheels to the outside of the flares without spacers? Or are you just wanting to run a really wide wheel and tire setup? What are you going to use for flares?

Yeah I was thinking really deep wheels & was gonna try to use replacement fenders from same year.
I was thinking bout narrowing said fenders just a lil if need be.