Driveshaft loop?

[Wh4t3v3rs]

I did Elevated conceots transmission crossmember with hoop..

You must be registered for see images attach

 

[Whipped96]

How much clearance do you have between the crossmember and the floor, I was looking to run a 4” exhaust and wondered if this would give me enough room?

 

[Wh4t3v3rs]

How much clearance do you have between the crossmember and the floor, I was looking to run a 4” exhaust and wondered if this would give me enough room?

That would be a good question! I have fender exit exhaust.... I would be more then happy to take some real life photos with a tape measure. I have the cab off the frame at the moment, so it wouldn't be a big problem. The website, www.elevatedconceptsinc.com, has lots of photos of the product installed as well as a google search and then click photos.....

 

[Whipped96]

I have a fender exhaust also but when I switch turbos I was thinking about running it out the back. I’ve spoke with Elevated Concepts before and it doesn’t sound like you gain much room with that crossmember. If you can get a measurement from the top of the crossmember to the top of the frame that would be great, I can figure the rest out from there.

 

[Wh4t3v3rs]

I have a fender exhaust also but when I switch turbos I was thinking about running it out the back. I’ve spoke with Elevated Concepts before and it doesn’t sound like you gain much room with that crossmember. If you can get a measurement from the top of the crossmember to the top of the frame that would be great, I can figure the rest out from there.

Absolutely!!! I will try to get that posted today or tomorrow for ya.

 

[DonYukon]

Damn by the time Fast95 comes back this will be a sticky

 

[Wh4t3v3rs]

I have a fender exhaust also but when I switch turbos I was thinking about running it out the back. I’ve spoke with Elevated Concepts before and it doesn’t sound like you gain much room with that crossmember. If you can get a measurement from the top of the crossmember to the top of the frame that would be great, I can figure the rest out from there.

So, I have some nice photos and YES, a 4 inch exhaust will fit just fine!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Whipped96]

Perfect, thank you!! That gives me an awesome reference to see if that crossmember allows for more clearance than the factory one.

 

[DonYukon]

Perfect, thank you!! That gives me an awesome reference to see if that crossmember allows for more clearance than the factory one.

Sorry for the off topic but the wheels in your pic are they welds? also what size they are awesome

 

[alpinecrick]

Damn by the time Fast95 comes back this will be a sticky

lol.........