someotherguy
Truly Awesome
Just gotta work smarter, not harder.
As far as loctite goes, I've never had a bed bolt (other than extreme rust) that wouldn't come out by hand using a 1/2" breaker bar. I'd use the impact when handy, but I've also pulled plenty without an impact.
Heck even 2 engine hoists turns lifting a stripped chassis w/cab onto the trailer for hauling to the scrapyard into a 1 man job
Fuel pump job even out in the street with a borrowed hoist...
OK that's enough show and tell. Be sure you're testing that pump with a good gauge and like I said if your filter is old, replace it first, see if it helps. If not you're probably due for a fuel pump.
Richard
As far as loctite goes, I've never had a bed bolt (other than extreme rust) that wouldn't come out by hand using a 1/2" breaker bar. I'd use the impact when handy, but I've also pulled plenty without an impact.
You must be registered for see images attach
You must be registered for see images attach
Heck even 2 engine hoists turns lifting a stripped chassis w/cab onto the trailer for hauling to the scrapyard into a 1 man job
You must be registered for see images attach
Fuel pump job even out in the street with a borrowed hoist...
You must be registered for see images attach
OK that's enough show and tell. Be sure you're testing that pump with a good gauge and like I said if your filter is old, replace it first, see if it helps. If not you're probably due for a fuel pump.
Richard