I have a 92 c1500 and im trying to put a keyless entry with power locks and everything but its manual everything so it doesn’t have anywhere to run the wires to doors and im not sure what to do so if any of yall have gone through it and can show me what y’all did that’d be appreciate.
keyless entry wiring questions
- Thread starter Treyes
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I dont think its important but its just one $50 kit i bought from amazon not sure of the brand but the reviews were good
Technically doesn't jw though because lot of them come with directions and routes to take for install. If not the case, if it was me I would take the boots off a stock equipped one and drill the holes so the boot fits and run the wires from the door in to dash. Or if it's easier dash to door. I can send some picks of mine so you can get an idea. Yours being a 92 is a different trim and layout then mine, but at least you could see how gm routed the wires.
Yeah if you could leave some pictures that’d be great
Ill make sure to check it out thanks for the help
Could also do a p/w p/l conversion from a donor and then tap into that wiring seems alot easier and takes out alot of the guesswork
If not did your kit come with lock actuators and what do they look like. Or possibly a link to see what you got
If not did your kit come with lock actuators and what do they look like. Or possibly a link to see what you got
Similar threads
