RolandoLowko
Newbie
Got the temp gauge working next is the Oil pressure ill do an Update then
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Appreciate it man this was my first swap ever !Nice job. I also used the 3 wire sensor. It seems to read just a bit on the cold side, but it's close enough for me! I also learned my lesson about using anything other than Delco for it - the Standard Motor Products sensor lasted a few months.
Here are the parts what i used to plumb my fuel system for anybody that wants to do this kept the Fuel filter/Regulator pretty much stock location. THIS IS FOR RETURNLESS FUEL SYSTEMS ONLY!!!
(1)Russell 640860
(1)Russell 640850
(1)Russell 640003
(1)Russell 640853
(4)Russell 610025 (Hose Ends)
Can use 5Ft of AN hose its plenty enough
Correction Meant ******SPEEDOMETERThis is how i made my Tac Work on my 94 GMC Sierra would work on 92-95.
I used the Brown Wire off the DRAC Box
You must be registered for see images attach