96 2 door Tahoe ls swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ovaddiesr

Newbie
Joined
May 12, 2018
Messages
44
Reaction score
52
Location
Michigan
The Midwest got the best of my old gal so I had to rebuild the tailgate section. I cut out all the rust and tried my best to remake it like the original. The fuel tank crossmember was rotten so I removed the rivets and replaced it with a southern clean one. I cleaned the entire frame and por 15 the chassis. Should be ready for paint soon

You must be registered for see images attach


You must be registered for see images attach
 

ovaddiesr

Newbie
Joined
May 12, 2018
Messages
44
Reaction score
52
Location
Michigan
Finished the tank, and tailgate section. I finally got around to cutting out the rotten bits around the fuel door area. I’m not a body or paint guy so this is a cheap simple fix for my work vehicle

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

skylark

I'm Awesome
Joined
Nov 15, 2011
Messages
7,926
Reaction score
7,994
Location
Grants Pass, OR
Finished the tank, and tailgate section. I finally got around to cutting out the rotten bits around the fuel door area. I’m not a body or paint guy so this is a cheap simple fix for my work vehicle

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
That is very passable. Looks great!
 

ovaddiesr

Newbie
Joined
May 12, 2018
Messages
44
Reaction score
52
Location
Michigan
Did you use a 58x crank, or swap the tone ring?
So originally I had an ls2 but cracked a cylinder sleeve so I transferred everything into a lq9 but beefed up the bottom end except for the tbss crank. It was all balanced before install
 
Top