Bought a CC Dually 454 Whipple

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Supercharged111

Truly Awesome
Joined
Aug 20, 2015
Messages
12,617
Reaction score
15,245
Finally got it running last night. Had to flash a custom operating system on there to accomodate the 2 bar MAP. Ran like **** though, but good enough to get it home. Threw a P0200, open/short/problem with the injector circuit. I broke out the multimeter and injectors 6 and 8 were showing open circuit. This morning, injector 8 claimed to be good. Back off came the plenum and sure as **** 6 and 8 weren't fully seated. I also remembered last night that I hadn't attached the vacuum reference line to the FPR so I did that too while I was in there. Truck runs better than ever now so we can proceed with wideband installation followed by boost.
 

Christian Steffen

I'm Awesome
Joined
May 31, 2016
Messages
1,173
Reaction score
431
Location
Green River, WY
Finally got it running last night. Had to flash a custom operating system on there to accomodate the 2 bar MAP. Ran like **** though, but good enough to get it home. Threw a P0200, open/short/problem with the injector circuit. I broke out the multimeter and injectors 6 and 8 were showing open circuit. This morning, injector 8 claimed to be good. Back off came the plenum and sure as **** 6 and 8 weren't fully seated. I also remembered last night that I hadn't attached the vacuum reference line to the FPR so I did that too while I was in there. Truck runs better than ever now so we can proceed with wideband installation followed by boost.
Hell yeah, good luck.
 

Supercharged111

Truly Awesome
Joined
Aug 20, 2015
Messages
12,617
Reaction score
15,245
Driveability is good with the blower, but WOT fueling is waaaaayy short. Gonna rent a fuel pressure gauge tomorrow to make sure I have enough pump and if so, will push forward with VE and MAF tuning to bring it back in line. Virtually no knock retard in closed loop, mostly only WOT which is where it's coming up way short on fuel. Gotta get the wideband talking to EFILive but first I need the cord which I can't find. Hopefully it's in the 1500's glovebox.
 

Supercharged111

Truly Awesome
Joined
Aug 20, 2015
Messages
12,617
Reaction score
15,245
It's running out of fuel pressure badly, drops down around 40. I'll have my injectors maxed at sea level trying to cover up a loss of fuel pressure with additional injector open time. I need a Walbro 255 and FAST. Which 255 fits our trucks? There are 3 different in tank versions.
 

JSlezak83

I'm Awesome
Joined
Jan 13, 2019
Messages
334
Reaction score
325
Location
RI
I feel like something like a 4th gen F-body should fit in the bucket, but I’m totally spit wadding. Most of my GM EFI knowledge ends before OBDII was a thing.
 

Supercharged111

Truly Awesome
Joined
Aug 20, 2015
Messages
12,617
Reaction score
15,245
So finally found the serial cable to get the wideband talking to EFILive. Plugged it in, set it up, and went for a rip.

xc_hide_links_from_guests_guests_error_hide_media

By doing this, I disabled my AFR gauge to feed EFIlive. When I got back, the data is looking kinda weird. It claims on one hand that I'm in the 9s WOT in one area of the software and in another the northern 12s. I have to wonder if I'm still doing something wrong.
 

Christian Steffen

I'm Awesome
Joined
May 31, 2016
Messages
1,173
Reaction score
431
Location
Green River, WY
It's running out of fuel pressure badly, drops down around 40. I'll have my injectors maxed at sea level trying to cover up a loss of fuel pressure with additional injector open time. I need a Walbro 255 and FAST. Which 255 fits our trucks? There are 3 different in tank versions.

I wanna say that it was the gss340 that i used, but im not 100% on that. Mine does have the bucket though..

That's a lot of pressure to be down..

Do you have to setup a transfer function to convert your WB voltage to AFR? Any issues with that?
 
Top