Unplugged connector by blower motor

[jambe]

Hey all, i was going to replace my blower motor relay switch when i noticed this connector unplugged. Anyone know what it is for? Previous owner just put in a new resistor for blower motor before selling it to me.

You must be registered for see images attach

 

[east302]

I’m thinking it goes to your blower relay. Pictures are of a 98, you can kind of see it there. It might be connector #C203 in the diagram.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[jambe]

Perfect, i plugged in the connector and now my “HI” setting on the blower works. Only low,2,3 was working, thought it was the relay. Hopefully it wasn’t disconnected for a reason.
Thx for the help

 

[east302]

Good deal, glad it worked out. Someone probably had the dash down at one point (your white connector would have been clipped onto a support plate originally) so maybe it just didn’t get reconnected.

 

[GoToGuy]

We're going to replace blower relay or blower switch?

 

[jambe]

We're going to replace blower relay or blower switch?

I just replaced the hvac control unit on the dash. The blower switch was going but still couldn’t get “hi” to work.