the 1990 GMC Sierra DD

[project 67 sub]

Score!!! Got some 99-06 lift spindles, for when I graft a newer front frame section under my truck. So I can have LS power, and a better selection of long travel suspension.

You must be registered for see images attach

Well ... That's not good. Gotta get that fixed ASAP!!! Lol.

You must be registered for see images attach

 

[project 67 sub]

SCORE!!! CST mid travel control arms, and some shackles for $127 from the local salvage yard

You must be registered for see images attach

You must be registered for see images attach

 

[project 67 sub]

Free Bilstein shocks? Don't mind if I do. Lol

You must be registered for see images attach

Pressure washed all the crap off...

You must be registered for see images attach

 

[project 67 sub]

Templates for upper control arm mount gussets made. Almost time to cut them out of 1/4" steel plate. MIGHT trim them up a bit later as well

You must be registered for see images attach

You must be registered for see images attach

4 of the possible 8 gussets traced out on 1/4" plate. Now to just cut them out.

You must be registered for see images attach

 

[project 67 sub]

4 of the 8 gussets cut out

You must be registered for see images attach

4 of the 8 gussets done. The other 4 will get done when I swap out the control arms

You must be registered for see images attach

$50 Beard suspension seats, and seat track/brackets. Just need new upholstery and foam. Lol

You must be registered for see images attach

You must be registered for see images attach

New bushings for the CST lower control arms

You must be registered for see images attach

 

[project 67 sub]

Free rancho shocks for the rear? Sure why not. Lol. Just gotta put the right upper mount in place of the through bolt.

You must be registered for see images attach

Exhaust remodified (didn't tack weld everything together before welding solid, so had to redo it) after putting a new cat back on it. and also added a turn down on it i stole off the suburban. Lol

You must be registered for see images attach

And Rancho shocks installed

You must be registered for see images attach

 

[project 67 sub]

You must be registered for see images attach

 

[project 67 sub]

New tail lights came in... Gonna look nice once I repaint the truck

You must be registered for see images attach

Heck yes!!! 300watt 52" curved LED light bar came in. Should be nice and bright once I get it hooked up, and mounting brackets made

You must be registered for see images attach

 

[project 67 sub]

Added some LED bulbs I bought a while back to the new lights. Should be super bright with 136 LED's between the 2 bulbs in each housing

You must be registered for see images attach

LED light bar brackets came in

You must be registered for see images attach

More parts... New and better headlight bulbs, and a new fuel pump to replace the non-working one

You must be registered for see images attach

Fuel pump fixed, and light bar mounted... Just need to wire it up now

You must be registered for see images attach

 

[project 67 sub]

And... Its white now. Just gotta repaint all the black

You must be registered for see images attach

Tail gate painted white

You must be registered for see images attach

And wheels painted gloss black

You must be registered for see images attach

Much better

You must be registered for see images attach

April fools day score... Just gotta make or find and buy some brackets/mounts for them, so I can mount them on my front bumper

You must be registered for see images attach

Pigtail end on the offroad light harness fixed the cheap way... By using a trailer wire harness extension. Lol

You must be registered for see images attach

Light mount that came with the lights I bought was tweaked all to hell. But I had another one I got when I bought the lights currently on the front of my truck. So I decided to use it for mounting the lights to my bumper. In the process of modifying it for that now. Already cut the lower corners off and swapped them to opposite sides and welded them back up, so that way all the mounting tabs/points are on the back side of the light mount for a cleaner look.

You must be registered for see images attach

The start of my temporary "light bar" mount

You must be registered for see images attach

You must be registered for see images attach

Getting their

You must be registered for see images attach

You must be registered for see images attach

Almost done...

You must be registered for see images attach

You must be registered for see images attach

Making a "skid" plate.

You must be registered for see images attach

Rolling it under the front, and almost ready to pull it back off to cut/trim the plate back down

You must be registered for see images attach

Much better. Just need to figure out how I'm gonna attach the side support rods

You must be registered for see images attach

You must be registered for see images attach

Out having a little fun

You must be registered for see images attach

short little video

You must be registered for see images attach

Clear light covers/rock guards for my HID lights came in.

You must be registered for see images attach