Project Ted, a 1993 RCSB 496 Build

[Justin S]

Finally got the crank pulley installed, just need to get a few more nice new bolts to hold all of the accessories on the front of the engine, and I can pop the belt on. Also made a half assed attempt at trying to shove the clutch pedal assembly in place for about 5 minutes, with no luck. There'a bunch of wiring in the way, so i'll probably have to remove some things to make it go in. Maybe on Saturday.

 

[Dylan1991_1500]

Summit sells brackets that mount on the carb that will give you a space for your return spring.

 

[slowburb]

**** you aren't finished with this truck yet!!??!?














Kidding, kidding.

 

[Dylan1991_1500]

He gets too drunk then just starts throwing burritos around the shop.

 

[Justin S]

This is so true. I'm only proactive for the first hour or two

 

[dave_erald]

The hydroboost a gmt400 or 800 unit?

 

[Justin S]

The hydroboost a gmt400 or 800 unit?

Hydroboost out of a 400 with 800 MC

 

[dave_erald]

Ahhh Okay same thing i did. Works real well on road, like completely different truck after this. So nice

 

[Justin S]

Finally got around to finishing up the drive belt setup, minus one wp bolt. Ted also has a new shop buddy, won't stay inside for long though, not terribly worried about it getting rusty.

You must be registered for see images attach

You must be registered for see images attach

 

[Justin S]

Got a K&N filter for Christmas, now it looks better.

You must be registered for see images attach