How to: 88-94 climate control LED swap

[Keepinitoldskool]

Here's mine in red

Looks a little rough around the edges? What did you use to cut it?

 

[bullas1022]

Its not the cut its some glue I didn't scrape off yet cuz I'm lazy. But I used a dremel with a cut off wheel to rough it out then I used a sanding wheel to make the fitment perfect

 

[Keepinitoldskool]

Ok cool. I wonder if there is any money to be made by making these and selling them as a set with the leds.

 

[bullas1022]

I would have bought one

 

[mrnapolean1]

What color is the actual display?
I would like to make mine white (color temperature 5000K-5500K) without it being too bright.

 

[Lordkay972]

What color is the actual display?
I would like to make mine white (color temperature 5000K-5500K) without it being too bright.

Its white. It'll be hard to determine what is being displayed though without a colored screen.

 

[mrnapolean1]

I would like for this to match my dash lights that I plan on ordering from Superbrightleds.com

BTW do you know the type that these clusters take?

 

[Lordkay972]

I would like for this to match my dash lights that I plan on ordering from Superbrightleds.com

BTW do you know the type that these clusters take?

These are the ones I used. You'll need to buy the bases too.

https://www.superbrightleds.com/mor...ge-base-socket/704/962/?accessory_of=199-base

https://www.superbrightleds.com/mor...e-wedge-base/199/#tab/Accessories/subtab/base

 

[The Arctic Fox]

Here's the link for the LED's I bought: https://www.superbrightleds.com/more...panel-led/220/
I measured it and got 4mm.

 

[DerekTheGreat]

So I swapped my 1989's HVA/C control module for one from a '93 to gain the "MAX A/C" button. It works fine & dandy except for the lights, all of them appear to be burned out. I'm not looking for LED's, just stock replacements. Anyone know what the part number is? Or should I order these:
https://www.taninautoelectronix.com/4mm-14-volt-automotive-light-bulbs-p/4mm14v.htm