Exhaust upgrade

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Stephen7891

Newbie
Joined
Apr 7, 2018
Messages
7
Reaction score
0
Location
canada
I am looking to upgrade my stock exhaust with a full system header back. I plan on swapping my 305 for a 350 but I'm looking to finish my exhaust first. My question is will the 350 I put in later bolt up to the exhaust I make for the 305.

Thanks in advance
 

7thdarkangel

Breaking Sh*t
Joined
May 26, 2017
Messages
258
Reaction score
244
Location
CT
The short answer. Yes. Should bolt right up to any gen 1 small block. Just double check the last set of mounting holes on the heads some have two some have one(this really only matters with the stock manifold. It needs the second bolt hole). Also oval vs square port.

This is just what i have com across.


So if anyone can add to or correct my info please do so.
 
Top