Dick Cepek Series II Alignment Cam

[AZDirt]

I cannot find the Caster / Camber Cam Bolt Kit that will replace the Dick Cepek Series II kit for a 1994 Chevy Silverado 4x4.

I picked up an OEM replacement but the cam washer is much too small. Any ideas on where I can find a replacement?

Here are the original links to the Series I and Series II kits

http://www.performancelifts.com/installation/cepek/71000.pdf

http://www.performancelifts.com/installation/cepek/71002.pdf

This is the cam washer that is now rounded out and won't hold an alignment. The lift is about 15 years old and I am not sure if I have to have a machine shop make one or what...? Ideas?

You must be registered for see images attach

You must be registered for see images attach

 

[grampadirt]

We sell these where I work...

http://www.spcalignment.com/

 

[AZDirt]

We sell these where I work...

http://www.spcalignment.com/

Great! I looked through the catalog but their are not sizes listed. Do you know the part # that i'd need or do i need to call them to order?

Thanks!

 

[grampadirt]

Can't do it until Monday but Rockauto has several companies listed including Moog and ACDelco and is found under ''suspension''.

 

[fish4hc]

Did you ever find a solution. Im having the same problem as I have also stripped them.

 

[AZDirt]

My solution was pull the old part's off and took it to a machine shop to re-manufacture. They used thicker steel and I had them make 8 total so I won't have this issue again for some time. It cost me about $400 total w/o alignment.