another what hits, what fits thread

[DHGFX4]

Ive searched and havent really found a solid answer. Ive found alot of info about running a 285/75/16 on stock obs trucks/suvs; with or without factory or aftermarket wheels.. etcetc.

But heres what im wondering, im looking at a set of BFG a/t 285/75/17s on stock NBS wheels.. i know that BFGs tend to actually run smaller then their said size. I wonder if theyll fit with minimal rubbage.. like i said, i couldnt really find any info on anyone running a 285/75/17 on stock NBS wheels on an obs. Btw, its going on a 96 stock Suburban

 

[zigsz71]

They'll fit. We can fit 35's on these trucks when stock wheels are used although they may need a small, teeny, tiny bit of crank/trim to clear. The 285's on NBS 17's will be fine without any modifications though.

 

[ChrisAU]

Keep in mind a 285/75/17 is 1" taller than a 285/75/16, some crank may be required.

 

[96k1500]

285/75r16, if they are 1" taller for 17s that would only be 1/2" closer all the way around, mine is cranked but going to decrank soon

You must be registered for see images attach

 

[chevyman0191]

You must be registered for see images attach

285/70/r17 on nbs wheels.... had leveling kit in this pic would b same as cranking stock keys.

 

[dcZ71]

probably means 285/70r17, the a/t is not made in 285/75r17.


I had those on my 96 on oem 17's, fit easy no crank no changes just bolt up.

You must be registered for see images attach

 

[DHGFX4]

You must be registered for see images

285s no crank no rub.

 

[FusionX]

What about 33 1250 17? Would they fit with cranking and some trimming?

 

[twomanymontes]

Does anyone run 305/70R16 with just a crank of the t-bars? They are pretty much the same height as 285's but are wider.

 

[96k1500]

Does anyone run 305/70R16 with just a crank of the t-bars? They are pretty much the same height as 285's but are wider.

305/70r16 will fit with crank and block