99-07 springs on 97?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

84cj

Newbie
Joined
Jun 1, 2016
Messages
37
Reaction score
6
Location
Maine
Will rear springs from an 03 fit on my 97? I haven't been able to find any specs (length/width/etc).
 

GaryCCR

OnlyBodyStyle enthusiast
Joined
Jun 6, 2016
Messages
99
Reaction score
28
Location
New Orleans
What kind if vehicle? 2wd? 4wd? 1500? 2500? 3500? Truck? Tahoe? Suburban?

To my knowledge the 400 and 800 pattern do not share springs, coil leaf or otherwise. Good luck.
 

84cj

Newbie
Joined
Jun 1, 2016
Messages
37
Reaction score
6
Location
Maine
found some specs. Same width. Same length. Same measurement from pin (center) to spring end. The major differences seems to be the bushing and the bolt size used.
 

MIHELA

1-5-6-3-4-2-7-8
Joined
Dec 9, 2009
Messages
1,367
Reaction score
1,596
Location
Sioux Falls, SD
They are the same length all the way up to 2017. The 2010+ HD trucks have wider springs though.
 

racnredneck

Newbie
Joined
Dec 4, 2016
Messages
42
Reaction score
11
Location
tucson, az
yes they will fit, I did on my old 92 c1500 with 3/4 ton rear springs... butt thee front eye hole is bigger, so you will have o sleeve the bushing from the hardware store check bolt fit 1st. the install with original bolt, works well used bronze sleeves form ace hardware.
 
Top