2wd build ideas

[Dhash]

And thank you everyone for the replies, this site is awesome. I would lower it, but my son just turned 3 and if truck was up about 4 more inches it would make the car seat ordeal easier.

 

[95C1500]

I do hate the frame hanging down. But maybe a 1.5" would do the trick. And fit 32x11.50
I just measured fender height, all where even at 32-1/4". ¿

Ill try to find a pic but look at these 2wds with a 3" body lift. The frame hardly shows at all. I'd go with the 3" personally. I ran 32x11.5 with the 2" coil lift. I only rubbed the valence in reverse at full lock. I also had wheels that stuck out a little so you may be fine on stock wheels

 

[98_GMC]

real nice truck. lmk if you ever want to sell it. although d prefer it stock height lol hahaha

 

[92silverado1500]

I do hate the frame hanging down. But maybe a 1.5" would do the trick. And fit 32x11.50
I just measured fender height, all where even at 32-1/4". ¿

I ran 32s at stock height, you could probably run 33s with the body lift. Not sure if 33s would rub though

 

[MarkZ28]

Leave it stock, use the money to get the 4.10 and locker/limited slip. Im going 3.73 with locker due to being driven on the highway a lot. Also dumping the tbi and going with aluminum racing heads, nice big cam, carb, etc. In the future it will be getting a T56 six speed.