2" block and crank?

[ShadowRejects]

Has anyone done a 2'' block and crank their t-bars and put 35's on? Can it be done?

 

[LoudnLifted88]

i cleared 35s stock but wouldnt reccomend it id say put a AAL in it crank to level and run 33s

 

[ShadowRejects]

I might.. I just want the cheapest way to put 35's under my truck without a body lift.

 

[iEnding]

I have a body lift with 315's so 34.8 and I ran 33's stock but I didn't want a bl at first but now I wouldn't go back.

 

[ShadowRejects]

I have a body lift with 315's so 34.8 and I ran 33's stock but I didn't want a bl at first but now I wouldn't go back.

I would get a body lift, but id have to ditch my rear bumper.. It's an aftermarket bumper that connects straight up to the frame and has a tow hitch welded on to it. It would be to big of a hassle to lift it up to align with the truck

 

[chevyman0191]

another thing to keep in mind bout running 35s alot people on here will tell you its recommended that you do a re gear too.

 

[iEnding]

I have 3.42's with my 315's and I will re gear sooner or later but I don't push my truck enough to actually tell a difference.

An yeah ditching that or even fabbin it up woul probably be a hassle

 

[Mean Green]

I would not recommend running a 35" tire on just a crank and block. 33's and you'll be fine, other wise body lift it.

 

[bluex]

It's gonna ride like crap with enough crank to clear 35's on crank only. You will have like no down travel left at all....

 

[ShadowRejects]

True. I might just stick with 33's then. Thanks everyone for the help