1994Cheyenne
Newbie
My truck is a 1994 c1500 Cheyenne standard cab fleetside 4.3 w/4l60E.
I found a truck that still has it's transmission and transfer case. It's a 1994 k1500 standard cab stepside with the 350. It should have no problem bolting up. I know most people would just try to tear it down and change the tail shaft. But I though about leaving the transfer case on and set it up so i can have 2wd with low range. I drive off road pretty frequently. I'm planning on getting a lunchbox locker and moving my rear gears up from the 3.42s to 3.73s. anyone know what my best bet on the trans and transfer case is?
I found a truck that still has it's transmission and transfer case. It's a 1994 k1500 standard cab stepside with the 350. It should have no problem bolting up. I know most people would just try to tear it down and change the tail shaft. But I though about leaving the transfer case on and set it up so i can have 2wd with low range. I drive off road pretty frequently. I'm planning on getting a lunchbox locker and moving my rear gears up from the 3.42s to 3.73s. anyone know what my best bet on the trans and transfer case is?