Christian Steffen
I'm Awesome
I was thinking IAT wen't -40 too, looks like that's the ECT modifier. Could probably use ect, would just have to change the OL Eq ratio for that temperature.
1991 C1500 TURBO 5.3/4L80E
- Thread starter RDF1
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I was thinking IAT wen't -40 too, looks like that's the ECT modifier. Could probably use ect, would just have to change the OL Eq ratio for that temperature.
Fans work off of ECT tho. Ill give the COS5 Nitrous tables a try, if it works like i want it to then ill be ok with that..
I did the COS5 on a heads/cam 6.0 Swapped in a mustang and dialed it in on engine and then tried the COS5 Nitrous tables to make sure they pulled timing and could adjust the fuel. Then we put a 300 shot on it and my gosh was that a fun ride.
I did the COS5 on a heads/cam 6.0 Swapped in a mustang and dialed it in on engine and then tried the COS5 Nitrous tables to make sure they pulled timing and could adjust the fuel. Then we put a 300 shot on it and my gosh was that a fun ride.
Christian Steffen
I'm Awesome
That sounds like a party haha
I also forgot transients are a function of ect - so probably not the best idea. Let's hope the custom OS works as it should.
shamrock246
I'm Awesome
NICE!!!!!
GarrettGmc
I'm Awesome
Man that sounds good, Gunna need a longer vid.
Thanks. I'm using 87 octane to test for leaks and idle tuning. Once I run these few gallons out I'll top it off with 93 and do some pulls.
Man that sounds good, Gunna need a longer vid.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Finally got my Tag and Insurance.
Putting the new Alum 3 Row radiator and LS1 Camaro Efans on it tomorrow and hopefully driving it down the road to get some tuning done. Then i can slowly tinker with it as i go.
Ordering the AC compressor next week i think.
https://www.dirtydingo.com/shop/product_info.php?cPath=373_376&products_id=1596
Going to make some brackets for the driver side by the alternator.
Putting the new Alum 3 Row radiator and LS1 Camaro Efans on it tomorrow and hopefully driving it down the road to get some tuning done. Then i can slowly tinker with it as i go.
Ordering the AC compressor next week i think.
https://www.dirtydingo.com/shop/product_info.php?cPath=373_376&products_id=1596
Going to make some brackets for the driver side by the alternator.
Rad and fans are in. Kinda.
Gotta make mounts for the rad and fans then mount the relays.
Threw it in there just to make sure it was gonna cool it.
It did.
Drove it to the gas station and back. Runs great to be only idle tuned.
Rolled in to it once to hear the turbo. It fell on its face. No timing and went stupid rich.
I'll work on the tune this weekend. Got 2 sets of tires to burn down too.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Gotta make mounts for the rad and fans then mount the relays.
Threw it in there just to make sure it was gonna cool it.
It did.
Drove it to the gas station and back. Runs great to be only idle tuned.
Rolled in to it once to hear the turbo. It fell on its face. No timing and went stupid rich.
I'll work on the tune this weekend. Got 2 sets of tires to burn down too.
You must be registered for see images attach
Sent from my SAMSUNG-SM-G870A using Tapatalk
