13" NBS rear disc on 14 bolt SF

[tbss instigator]

I would defiantly like to see pictures! And a list of everything needed once you have it all figured out. I've done a good bit of research and it all still seems kinda choppy lol


Sent from my iPhone using Tapatalk

I just got the final pieces in today. But i have a feeling I'm going to be needing a couple more parts. and making a few trips to my buddies shop to make a couple brackets and have some stuff welded. Hopefully i can work on it this weekend.

 

[tbss instigator]

I found this link that doesn't deal with the 14 bolt but it deals with the 10 bolt and it shows step by step install on a big brake kit. I just came across this so hopefully it helps out with filling in the gray areas. It definitely gave me a little bit of a better under standing on what to do.
http://www.lowridermagazine.com/tech/0212lrm_stillen_brake_upgrade/#__federated=1

 

[GordonCustoms]

I grabbed a SF 14bolt out of a 02 GMC 2500 that already had disc brakes. I rebuilt it with all new parts, welded new spring perches on and shock mounts and installed 6lug 14bolt axles I got out of a axle in the junkyard. I put a 1/4" wheel spacer on the hub before I put 02 1500 rear disc on. And I'm using the duel pistons calipers that came on the 2500 which are the same calipers they put in the front on the gmt800 1500's

 

[Stokes1114]

I grabbed a SF 14bolt out of a 02 GMC 2500 that already had disc brakes. I rebuilt it with all new parts, welded new spring perches on and shock mounts and installed 6lug 14bolt axles I got out of a axle in the junkyard. I put a 1/4" wheel spacer on the hub before I put 02 1500 rear disc on. And I'm using the duel pistons calipers that came on the 2500 which are the same calipers they put in the front on the gmt800 1500's

Do you know what the length axle these are? I just got an 01 14 bolt SF disc brakes and need to swap to 6 lug.

 

[GordonCustoms]

Sorry it's been awhile since I did my swap the 6 lugs axle shafts from the 9.5 gmt400 where direct swap for the gmt800 axle. I used 02 1500 rear rotors with 1/4" space BEHINED the rotors to put the rotors center in the 3/4ton cailpers

 

[Sampuppy1]

I have a six lug 14bsf. Want discs. Have no clue what I need to make all this happen. I can't machine spacers, I don't have a welder.

Sent from my flagged XT1635-01

Tyler/T-Unit

 

[Nash]

I have a six lug 14bsf. Want discs. Have no clue what I need to make all this happen. I can't machine spacers, I don't have a welder.

Sent from my flagged XT1635-01

Tyler/T-Unit

Try this place for the spacers. I think the spacers are 66mm for the 14 bolt SF . I have a set but can't recall exact width. The spacers show are 20mm but, they will make the size you need.

http://www.cutthroat4x4.com/catalog/product_info.php?cPath=18_25&products_id=63

 

[davkenrem]

I just completed this Disc brake Swap this weekend, however, my 16" factory wheels will not fit over the caliper.

You say your running 16" wheels with yours?

You must be registered for see images attach

You must be registered for see images attach

And this would definatly not work with 15" rims I have 16" classic 2's and the is about 1/4" of clearence between the rim and caliper.

.

 

[ryeguy2006a]

Does anyone have a swap like this but for keeping factory drum in rotor conversion and keeping 8 lugs?

 

[DamHoodlum]

https://www.littleshopmfg.com/

Any Option You Need

Problem Solved