97SWBCHEVY
OBS Enthusiast
Well I pulled the trigger and ordered some **** today…so at this point I can take a break from going back and forth with myself on which way I should go with this and that! Lol
The 411 swap has been done and the engine is at the machine shop…
So any tips/opinions/advice from y’all on the rest of the exhaust starting from coming off the back of theses long tubes I ordered??? X, H, true duals, CATS, mufflers…to the tips, which I plan on having em dump under the bed after going up and over the rest end…
Also I wanna hear yalls 3 cents on on gaskets, bolts, etc…etc…
Heads
https://www.summitracing.com/parts/EDL-60975
Cam
Spider Injector
https://www.summitracing.com/parts/SMP-FJ504
Headers
https://www.summitracing.com/parts/PTE-H8059-1
The 411 swap has been done and the engine is at the machine shop…
So any tips/opinions/advice from y’all on the rest of the exhaust starting from coming off the back of theses long tubes I ordered??? X, H, true duals, CATS, mufflers…to the tips, which I plan on having em dump under the bed after going up and over the rest end…
Also I wanna hear yalls 3 cents on on gaskets, bolts, etc…etc…
Heads
https://www.summitracing.com/parts/EDL-60975
Cam
COMP Cams 08-417-8: Xtreme Marine XM270HR Hydraulic Roller Camshaft Only Lift .495"/.503" Duration 270°/276° RPM Range 1200-5200 - JEGS
Comp Cams XTREME MARINEd
www.jegs.com
Spider Injector
https://www.summitracing.com/parts/SMP-FJ504
Headers
https://www.summitracing.com/parts/PTE-H8059-1
Last edited: