Search results

  1. cjman250

    Junction block wiring breakdown?

    Does anybody have a clear breakdown on which wires on the junction block on the fire wall are for a 93? Im having some electrical issues and want to see the layout for the wiring but can’t find any clear diagrams. TIA
  2. cjman250

    Zq8 steering box?

    I searched but couldn’t find a thread about this when using the search but, I’m looking at steering boxes and wondered if anyone has put a zq8 (sport package) steering box on a truck without having that package? And if so did it make any difference or would it be a waste of time?
  3. cjman250

    1993 GMC Sierra ECSB C1500 Build

    Been a hot minute since ive been on here lol. Well heres some updates for anyone that cares, I had to put a trans in it back in January Put 1.75" spacers on the rear to even it out with the front Drove it to Daytona Beach for Daytona Truck Meet otherwise ive been just driving it and havent...
  4. cjman250

    Random Missfire Issues

    Not loosing any coolant, egr was changed a few years ago. I tried unplugging the vacuum line on it and it still has missing episodes. Haha the fuel pump actually went out about a month or so ago so it's also new. I didn't change the relay so I almost wonder if that could be the problem.
  5. cjman250

    Random Missfire Issues

    Sprayed around it with carb cleaner and had no idle surge or anything to make me believe it is leaking. Put new plugs in also, probably should've mentioned that. Changed the plugs since it started and they all looked the same, no fouling or anything like that. The distributor is a Delphi unit...
  6. cjman250

    Random Missfire Issues

    Ive have a 93 c1500 with a 350 and keep having issues with random fits where my truck will start missing while driving down the road or sitting at a stop light it will miss and then stall out. I have no check engine lights but I hooked up a scanner to it at O'reilly's and it had a pending code...
  7. cjman250

    1993 GMC Sierra ECSB C1500 Build

    Got some led tailights. Getting ready to fix my parking brake and adjust my rears since they are way out of adjustment lol. Looking into getting my tint redone but I cant decide how dark I want it to be. Also looking for a new sub since mine quit working. Im sure Ive done some other little...
  8. cjman250

    Post your lifted 2wd's!

    What size fenders flares are you getting? Depending on which flares you get you will still have the tires poking out past the flares (assuming you are going to run 285/70/17 tires). I have that size tire on 17x10s with a -24mm offset and my fronts stick out pretty good. I had to trim the bumper...
  9. cjman250

    I wanna hear your exhaust set up!

    Looking to completely change my exhaust up on my 93 with a 350. Cant decide if I want short or long tube headers, or what mufflers I want (been looking at flowmaster) but I plan on doing no cats. let me hear what you have!
  10. cjman250

    1993 GMC Sierra ECSB C1500 Build

    Thanks! It's definitely got a long way to go but I'm happy with how it turned out
  11. cjman250

    Post your lifted 2wd's!

    17x10 Fuel Maverick - 24mm offset with 285/70/17 Toyo Open Country ATII. I have a couple more pictures in my build thread
  12. cjman250

    1993 GMC Sierra ECSB C1500 Build

    Dang it's been a little while, lol. Had to replace my pitman arm again since the cheapo master pro I put on a while back is already toast. Also replaced my steering shaft with the borgeson one. Steers like a brand new truck. Got my new wheels and tires in yesterday, gonna have to trim the bumper...
  13. cjman250

    95 Silverado Build

    Did you have to trim your bumper at all with the tires?
  14. cjman250

    Post your lifted 2wd's!

    Got my new wheels
  15. cjman250

    88-94 Split bench swap to buckets and console?

    I have a 93 ext cab with the split bench and was wondering if id be able to swap to either buckets with a center console from 88-94 or the 95-98 split bench with a fold up console without too much modifications?
  16. cjman250

    Post your lifted 2wd's!

    rides similar to stock, i dont like the stiffness of rough country shocks but it rides fine
  17. cjman250

    Post your lifted 2wd's!

    Anyone running 20x10s on a 4 inch? if so what is your offset and backspacing?
  18. cjman250

    Running issues

    Turns out my throttle body was loose
  19. cjman250

    Running issues

    Unplugged the egr and so far it hasnt happened again. Im gonna drive it to work with it off tomorrow to see if anything chnages. im assuming the egr is clogged?
  20. cjman250

    Running issues

    Unplug the vacuum line? It managed to vibrate its way off but I'm not sure if it did anything, I guess I didn't pay attention but I'll try it
  21. cjman250

    Running issues

    So my truck is acting weird and I'm not sure what it is. It's been dying randomly at stoplights and when I'm giving it gas sometimes it feels like it's not responding to throttle and then sometimes it feels like it's bucking until I floor it. When I floor it or let off and then get back on it...
  22. cjman250

    1993 GMC Sierra ECSB C1500 Build

    Some recent(ish) pics near Natchez Trace Parkway in Pasquo, TN before I finished school
  23. cjman250

    Wanting straight pipes on my 93

    I'm honestly thinking I'm just gonna leave the muffler and just change the piping
  24. cjman250

    Post your lifted 2wd's!

    seeing that makes me want new wheels even sooner. thats alot more clearance than the stock 15s
  25. cjman250

    Post your lifted 2wd's!

    how close is it to the spindle?

Latest posts

Members online

... and 10 more.
Total: 1,714 (members: 60, guests: 1,654)

Forum statistics

Threads
64,343
Messages
1,391,708
Members
51,456
Latest member
A_larios

Share this page

Top