Search results

  1. C

    How to: Install DIC in gmt400 overhead console

    ^^Yup 98 changed the fuel system to run through the pcm, in addition, the temp sensor behind the grill shouldn't be used, unless you don't want to use the temp on the mirror. It screws with the reading, I installed a second one Sent from my SAMSUNG-SM-N920A using Tapatalk
  2. C

    Any android users?

    I like my sony 601bt 2 din, but i got screwed on accessories like the nav module. Check out the 602/ 702 line. You can do a detail ss kit, or an install like mine and it's fully compatible with Android
  3. C

    1990 RCSB Z71 33k miles

    For 12k the seller had better cuddle afterwards
  4. C

    Green95Hoes LQ4 with NV4500 Conversion. Jam packed with info.

    Well looks like i'm going to be jumping onto the LS bandwagon as well. I've almost completed my NV4500 swap (from a 2000, motor and transmission together) which was originally inspired by your rig. I've got several yards locally with 5.3's and 6.0's so the swap is a no brainer compared to...
  5. C

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Been lurking for a long while getting info here and there, I tend to put more info over on Tahoeyukon forum since I have a 99 Hoe. I picked up a 411 for an old 4l60e that needed rebuilt and I can't wait to get to get the pinout and have it tuned for my rig. I'm very excited at the...
  6. C

    How to: Install DIC in gmt400 overhead console

    Then you might get a range reading ( not sure as I dont have a 411) but unless you can somehow get the reading from the tank to match a blazer it's still going to be inaccurate Sent from my SAMSUNG-SGH-I537 using Tapatalk
  7. C

    How to: Install DIC in gmt400 overhead console

    The only thing you would be missing on the 96 pcm is range, and its inaccurate on the 98 up anyways. Inless you plan on doing the swap for other reasons I wouldnt do it just for the dic Sent from my SAMSUNG-SGH-I537 using Tapatalk
  8. C

    How to: Install DIC in gmt400 overhead console

    Gray for illumination Sent from my SAMSUNG-SGH-I537 using Tapatalk
  9. C

    How to: Install DIC in gmt400 overhead console

    No problem, since I installed my dic I have to recalibrate my mirror compass every now and then. Its a standard chevy process Sent from my SAMSUNG-SGH-I537 using Tapatalk
  10. C

    How to: Install DIC in gmt400 overhead console

    No the 95 is obd1 unless im mistaken, try resetting the unit and then doing 2 circles in a parking lot to calibrate the compass if it's the unit from a short console it would have an external compass unit as well Sent from my SAMSUNG-SGH-I537 using Tapatalk
  11. C

    How to: Install DIC in gmt400 overhead console

    My first one showed e when I plugged it in, all fhe wiring was right I plugged in another and it works great Sent from my SAMSUNG-SGH-I537 using Tapatalk
  12. C

    How to: Install DIC in gmt400 overhead console

    Could be defective as well, check for temp, then speed first, did you connect the yellow wire on the dic to the purple on the serial data? Sent from my SAMSUNG-SGH-I537 using Tapatalk
  13. C

    HOW TO: Fix Bouncy/Hummingbird Fuel Gauge Needle

    Right, mine does the humming bird even after this fix and with a different motor that ive also done this to, connecting a new sensor.board directly to the gauge produces smooth and steady movement tho. Im probably going to put that sending unit in, and reground the tank and sending unit when the...
  14. C

    HOW TO: Fix Bouncy/Hummingbird Fuel Gauge Needle

    This helped on mine a bit but it's still nutty, what else could cause that problem?
  15. C

    How to: Install DIC in gmt400 overhead console

    Perhaps the ecu could be reprogrammed? Or possibly swap out the sending unit board on the fuel pump? That may require the motor in the dash from the blazer. I honestly dont worry about the range. My console is actually a Frankenstein of a blazer console front end and the base and back end of my...
  16. C

    How to: Install DIC in gmt400 overhead console

    sorry nvm it was a defective unit, swapped it out with another and it works. I tapped the temp sensor from my mirror and everything is great!
  17. C

    How to: Install DIC in gmt400 overhead console

    I've installed one of these in my 99 tahoe with the 5.7 vortec, as of now it illuminates but i've no speed temp or fuel readings. Is this just because i don't currently have the temp sensor connected yet? i've wired it according to the diagrams in the first post but no readings as of yet.

Latest posts

Members online

Total: 1,079 (members: 43, guests: 1,036)

Forum statistics

Threads
64,315
Messages
1,391,196
Members
51,402
Latest member
Kimmy

Share this page

Top