Search results

  1. ridiqls

    Damaged front end... anyone want to give me their input?

    Yeah it looked kind of off but the driver's side looked fine and straight, so unless the fabricator didn't do a good job making them equal hahah i was hoping it would work out.
  2. ridiqls

    Damaged front end... anyone want to give me their input?

    I have no idea lol but here are the update pics. Just drove her a little bit today but with yesterday and today it seems to be holding it's alignment. there was definite change the minute I got into the truck at Firestone. When i was turning the wheel it felt less sloppy and more center...
  3. ridiqls

    Damaged front end... anyone want to give me their input?

    Yeah I did but much better support over here :) What's Com? EDIT: oh you meant f150forum.com lol I'll post pictures to update. I want to drive it around today to make sure it's riding correctly and holding right though
  4. ridiqls

    Damaged front end... anyone want to give me their input?

    So I took it a different firestone... 3rd ones a charm. The guy was helpful and this branch was focused on customer service and he said he'll try to align it again and see if it has a problem. while aligning it. If so he'll let me know. Anyway his master tech was good and he got the camber set...
  5. ridiqls

    Damaged front end... anyone want to give me their input?

    Ah thanks. Yeah well the previous owner's friend actually custom fabricated those a-arms so I'm hoping he did it to fit the factory stuff and made it all the right measurements. The replacement sounds easy enough but I'm not sure if im prepared for potential problems that may come up. Things get...
  6. ridiqls

    Damaged front end... anyone want to give me their input?

    Thanks. Yeah it's definitely an aftermarket upper arm. These dinky little things are what it USED to look like stock: You guys are right the ball joints are "Roached" or bent. Does roached mean bent or destroyed? The more I look at it and watch this video here...
  7. ridiqls

    Damaged front end... anyone want to give me their input?

    I know this isn't a gm truck lol but I like this forum and like the people here so figured I'd throw this up to see if anyone here can give me their input. I traded my mustang for this truck to use as my daily and well.. lets just say I got the short end of the stick lol You can see the front...
  8. ridiqls

    Someone clarify shift kits for me?

    Ah! Just what i was looking for. Learn something new everyday. Thanks. So it does look like it is a shift kit. Thanks everyone
  9. ridiqls

    Someone clarify shift kits for me?

    Yeah I think it might be a shift kit then. I'm going to try and drive it again and floor it and see if the RPM goes up without the truck moving. On a side note, would you guys buy an used tranny for $150? There's one on craigslist and he said he parted out his truck and it only had 72k miles...
  10. ridiqls

    Someone clarify shift kits for me?

    The kind of "hard shift" the truck has is a hard clunk. As it clunks the rear tire chirps due to the transfer of power to the wheels. Only does it under very hard acceleration. As it reaches the redline it will hover high and then BAM! shift into second, truck will shake somewhat and tires will...
  11. ridiqls

    Someone clarify shift kits for me?

    Oh okay. Is there a way to know if it's slipping and slamming into gear (sign of a bad tranny) or if it is really a shift kit? I guess the tire chirp might explain it but then it could be because the rear has a detroit locker.
  12. ridiqls

    Someone clarify shift kits for me?

    Yeah I mean i have no reason to doubt the previous owner cause he races and the truck had a locker put in with regear in the back and he did the engine swap himself. The truck has things like a beefed up suspension and custom A-arms and push bumpers but it's always a possibility that someone is...
  13. ridiqls

    Someone clarify shift kits for me?

    My friend just bought a truck and the previous owner said he had a shift kit and torque converter put into it. The truck will chirp the tires and shift very hard when going from 1st to 2nd. Like from a stop if you take off and accelerate hard it will go up to a high RPM and then slam into 2nd...
  14. ridiqls

    1994 C2500 ...<insert something clever here>

    Does anyone know if you can buy a steering column with tilt and replace one without tilt? The seats caused the steering to be a little low and I dont have tilt. How difficult would this job be? If I have time today Im going to hit up the junk yard and try to grab some parts.. maybe the...
  15. ridiqls

    1994 C2500 ...<insert something clever here>

    oh cool thanks im going to try to bleed a little. I really dont know how much or how long to hold it for cause i dont have a pressure gauge so maybe a couple seconds at most. hopefully itll fix it.
  16. ridiqls

    1994 C2500 ...<insert something clever here>

    Ill try to take more but this one is probably a good one.
  17. ridiqls

    1994 C2500 ...<insert something clever here>

    that's mac's truck over at FSC right? looks clean Today i took the truck to an auto AC repair shop and they did an evaluation. Checked the pressure and they recommended I switch the AC pressure switch. I'm not sure which one but it's near the passenger's side firewall below the fuses and relays...
  18. ridiqls

    1994 C2500 ...<insert something clever here>

    Well just did it for the hell of it and finished about an hour ago. White matte plastidip. Lowes and home depot didn't have glossifier which I might add on. The contrast between the grill and the rest of the car is really outstanding but it was more of a test of how it would turn out. I may just...
  19. ridiqls

    1994 C2500 ...<insert something clever here>

    you ruined my door! haha just kidding naw I was in my garage and in the driver's seat and i was talking to someone and backing up and completely forgot the driver's door was wide open. i was only going to back up like 2 feet and the door got caught on the wall. stupid i know, i never do things...
  20. ridiqls

    1994 C2500 ...<insert something clever here>

    fhhwjklhaklwjhfklwjkjf #@@Ss jkljl2#@#@ FS4 and i spoke too soon all that bolt removing for nothing. there are two bolts or something along the door hinge which i cant get to so the fender cant be removed. Has anyone had any experience with something like this? or collision or body work in...
  21. ridiqls

    1994 C2500 ...<insert something clever here>

    i have no idea where they came out of but theyre brand new. I think theyre just aftermarket seats but then again i could be wrong cause they have all the electricals, seat belt sensors, etc. Ill try to take a picture of the mount. OKAY bad news, so pissed. my door got hyper extended. Like far...
  22. ridiqls

    1994 C2500 ...<insert something clever here>

    A few questions. I think I know the answer to this but does my steering wheel have tilt adjustment? I didnt see it anywhere but maybe it's hiding somewhere. It would be nice to raise it a little after I just installed my new seats. How do you turn the hazards on?? There's a little cylinder...
  23. ridiqls

    1994 C2500 ...<insert something clever here>

    Alright this is probably a stupid question but which of these 6 lug adapters are the right size for my truck? Or is there a way to find out? To refresh I have a 1994 C2500 7200 (not Heavy duty) 6 lug setup, 2WD. http://billetwheeladapters.com/6-lug-wheel-adapters-wheel-spacers.html
  24. ridiqls

    The truck is making weird noises when AC is on. Other engine mystery... Video inside!

    yeah still doing research on this. Okay I found this http://www.bsntech.com/bsntech-blog-mainmenu-321/commentary-mainmenu-291/5601-compressor-rapidly-cycling-on-and-off-in-car-air-conditioner.html It sounds exactly like my problem. Here's the thing, my AC is ICE COLD. Like seriously it's...
Top