Search results

  1. S

    5.7 TBI Low Oil Pressure Solution.

    Hey all. Seen several questions about oil pressure dropping to oh $hit level at idle when hot. Mines been doing that fer 8 months. Pressure is high until engine gets to operation temp (190), then levels off to 10 PSI per 1000 rpm at running speed. Then drops to zilch at the stop light with the...
  2. S

    REMOTE OIL FILTER INSTALL FOR 5.7 TBI

    REMOTE OIL FILTER INSTALL 5.7 Hey all. Just got done with this today. Real simple install. Summit PN# SUM-G4985-1 The kit comes with several adapters for different apps. This is what I needed for mine. I removed my oil filter adapter for easy install. Its not required but mucho...
  3. S

    5 Speed Shifter Knob Redeux.

    Hey guys, For those of you have standard trannys and are tired of the stock shifter knob, or the original has broken/fallen off/gotten lost, ect. The NV3500 stock shifter has a goofy setup. It's got a reduced shaft with no threads. Finding a replacement knob is a serious PIA. So, I fixed mine...
  4. S

    NV3500/10 bolt gear whine.

    NV3500/NP241/10 bolt gear whine. Hey all. Got a problem here. Gotta a 5 speed NV3500/NP241 w/a 10bolt 3.42 diffy. Couple a three days ago a loud gear whine stared. My first thought was bad tranny or diffy. Diffy seals are leakin so thats this weekends agenda. I refilled the diffy with gear oil...
  5. S

    GM Part #'s with Diagrams.

    Don't Know what part # you need? Try this. http://parts.nalleygmc.com/productSearch.aspx?ukey_make=1024 http://www.newgmparts.com/partlocator/index.cfm?siteid=213815
  6. S

    WHAT TO DO WITH WHAT I GOT.

    Fer us low budget guys that have a junk bin of stuff. I got a '92 Z71 with stock speaker placements and a basic Pioneer head unit ( DEH 1300MP). An alpine type R composite speaker system (6" subs, crossover,1" tweets) and a couple of pioneer 5" coaxial . The amp is an Alpine V-power 4 channel...
  7. S

    NV3500 to NV4500 swap w/ NP241

    I'm sure this has been answered SOMEWHERE, but I cant find it. Got a '92 with the NV3500/NP241 setup currently. Is it a direct swap? If not whats needed to make it work?
  8. S

    Alternate seats for OBS

    Hey all. Post your seat conversions. Bracket fabs and bolt in. With the truck/car model and yr that they came from. THX. edit; Please state how u installed them. Bolt match up or fab needed. Edit Edit; Previous Thread found.......Nevermind. ;)...
  9. S

    Allrighty,. All Central Texas Folkz Sound-off!

    I'm in the N-shore Austin Area. Anybody round here?
  10. S

    Shelbys Z71

    Sorry guys, I just realized my build thread was in the non-reply section. Any questions, comments, or general whatnot are welcome. Got this 92 ECSB 5.7 5 speed from a farmer for 1800 bucks couple a three months ago. It looked like the farmer had an allergy to wrenches. There was a HEAVY...
  11. S

    STUPID FUEL PUMP QUESTIONS

    So, I was wonderin; whats the performance/durability difference tween Denso, Delco, and Delphi? Can I use a 96+ fuel pump on my 92'? If so what would it matter goin thru a stock regulator?
  12. S

    FRACK-Dead ECM ??

    Hey all, I got a problem. Just installed a new oil press sending unit, To get to it I removed my dizzy.( needed a new gasket anyway). I replace the dizzy, and set timing. Had a problem at first cause I forgot to disconnect the EST wire. :Stupid Me: So I disconnect est, start er up, reset...
  13. S

    XJ Steering Shaft Upgrade (88-94 Trucks) 95+instructions on page 31

    Hey all, Read about this in one of ChrisAU's threads. Thought I'd detail it out. This is a super easy swap to eliminate a butt load of steering slop. Minus my learning curve the basic swap took about 20 min. The shafts that fit are 84-00 Jeep Cherokee XJ steering shafts. They are almost a...
  14. S

    WHO WANTS A GOOD FIGHT? Motor Oil Poll

    Hey all.:flame: Been searchin the net for oil performance. Didn't find anything here. I know, I know, I KNOW! everybody has their own traditions and wive's tales concerning oil, but on attempting to do a serious search, I have found nothin but a lot of pretentious egg heads who can't stop pissin...
  15. S

    ULTIMATE TBI mods stage 1

    Hey all, Got bored waitn for my new dist to come in and I've seen alot of questions regarding the process, so I started this. This is bone stock. Remove the TBI, 13mm bolts 1 front 2 back. Unplug sensors and hoses. The fuel supply and return nuts should be 5/8". If you want to keep the cruze...
  16. S

    Wiring connectors

    Hey all, Had a small fire,:banghead: Not too much damage, most of the wiring was protected by the loom "THANK GAWD", but some of my connectors were toasted. Been shoppin around for replacements but been gettin sticker shock. The prices are outrageous! Haven't found anything in the regular...
  17. S

    Perfection Clutch Master cylinder upgrade

    Hello all. I have a 92 Z71 K1500 ECSB. Just replaced my clutch master cylinder. Hope this helps any who need this. I know most think AC Delco is the cats meow when it comes to replacement parts, but I march to a different drum. The Stock oem clutch cylinders are plastic. As you can see this can...
  18. S

    shelbyt.67 92 Z71 build

    Moved to: http://www.gmt400.com/forum/showthread.php?12725-Shelbys-Z71
  19. S

    Fuel pump access panel

    Hey all. This is on a 92 ECSB Z71. Be sure to have a fire ext. and some wet towels close by. Check for leaks before u start. measure 4" from front of bed, any less will cut into cross support. Follow line from fuel door 12" into the bed. Square off a rectangle from these two points at about...

Latest posts

Members online

... and 19 more.
Total: 1,435 (members: 69, guests: 1,366)

Forum statistics

Threads
64,263
Messages
1,389,967
Members
51,255
Latest member
vetteman

Share this page

Top