Search results

  1. 9

    1994 k1500 350 swap has idle issues

    Ok thanks. The cam I'm not sure because when I called summit they said it would work fine with factory computer, Tbilisi and the valvetrain. Ill check for wires and such.
  2. 9

    1994 k1500 350 swap has idle issues

    Ok update as of this morning. Last night I took out the fuse for the ecm. Put it back in and drove it around for a while and it ran and idled fine. This morning I go to start it and it started up and had a really low and rough idle. Then I turned it off and it won't start. Check engine light...
  3. 9

    1994 k1500 350 swap has idle issues

    ok. well i had swapped out the ecms when i bean doing the swap so the battery was unplugged when the ecm for the 350 was put in. does that count or should i unhook it again?
  4. 9

    1994 k1500 350 swap has idle issues

    ok can you tell me how i reset these things?
  5. 9

    1994 k1500 350 swap has idle issues

    also even when the truck is warm it idles really low and takes a while to get the idle up. the scanner also showed a MAP sensor code so i replaced that. made some improvement but like i said even when its warm the motor takes a bit to idle and even then it still seems a bit low. i mean ive only...
  6. 9

    1994 k1500 350 swap has idle issues

    ok i will replace that as well. just hooked a scanner to it and the computer shows an IAC valve code. which is new so im a bit confused now
  7. 9

    1994 k1500 350 swap has idle issues

    other than idle it does run and drive fine in my opinion. and could you elaborate on the CTS issue
  8. 9

    1994 k1500 350 swap has idle issues

    hi everybody. like the title says i did a 350 swap in my 94. it was originally a 305 but i swapped in a 350. the 350 has a 20 over bore and a comp lw end cam. nothing wild its basically stock. i took the 350 out of a junk truck and completely rebuilt the motor. everything is pretty much new. i...
  9. 9

    Halo and Projector headlights

    i have mine hooked up through the factory wiring harness. never had any issue up until now
  10. 9

    Halo and Projector headlights

    ok guys ive got a real problem and i have no idea where to start. i have hids in my truck. theyve been in it a few months and i have never had an issue. but tonight they came on with the truck off, the key off and the healight switch off. now if i got in the truck and started it they would turn...
  11. 9

    HELP!!!!!! Cant choose which kit to buy

    hi guys. i have a 1994 Chevy k1500. i have a 350 built for it that has all new internals with a 20 over bore and a low end cam. heads were redone and have all new parts also. my trans is going though and i want to rebuild it. i found 2 kits and i cant decide which to choose. and if anyone here...
  12. 9

    procharger upgrade

    Ok well I got the motor back and I'm ready to start reassembly. I bought a low end cam and new lifters. So everything is now literally new.
  13. 9

    procharger upgrade

    Ok. I was only looking at pushing 6 to 8 psi on a totally redone 350 with a .20 over bore and all new internals. So what would you recommend I do to the motor to do this?
  14. 9

    Halo and Projector headlights

    Yea as long as the projector lenses you get will support HID bulbs you should be fine
  15. 9

    procharger upgrade

    im looking into putting a procharger on my 94 k1500. i just had a 350 bored .20 over and the heads were cleaned and rebuilt. all the internals are new and the block was dipped, baked and painted. so the motor is totally fresh. i was wondering what i had to do to put a procharger on my truck and...
  16. 9

    Halo and Projector headlights

    these are the lights i bought. http://www.ebay.com/itm/6000K-XENON-HID-HALO-LED-PROJECTOR-HEAD-LIGHTS-88-98-CHEVY-GMC-C10-C-K-TRUCK-SUV-/230703708278?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item35b7033876
  17. 9

    Halo and Projector headlights

    i think my buddy had the 4 hi mod on his truck. so i will look into that. any advice on how to put the hi beam in the hid kit? im not sure if it has the wiring for the hi beam. i can put the link to the lights i bought if that would help. thanks guys
  18. 9

    The Member Truck Thread

    1994 K1500 305 automaic not much done to it. plan on a 350 swap soon and putting the old stepside back on
  19. 9

    Halo and Projector headlights

    well the kit only includes a low beam. i wanted to know if i can put high beams on the kit
  20. 9

    Halo and Projector headlights

    i bought halos for my 94 k1500. they are HIDs with halos around both bulbs. any advice on installation? i got the kit off ebay for like $130. includes the ballasts and all the wiring. but its low beam only. is the low beam only common when switching to hids ior can i somehow still wire in a high...

Latest posts

Members online

Total: 1,145 (members: 14, guests: 1,131)

Forum statistics

Threads
64,334
Messages
1,391,489
Members
51,439
Latest member
sherberto

Share this page

Top