Search results

  1. 93-2dr-on20s

    OBS only , painted interior pics

    I'm thinking of doing a two tone grey and black interior in my '93 Blazer.My interior is currently grey and I plan on spraying the center part of the dash (glove box, radio panel and dash vent area) black as well as the plasics on the door panels. How does the plastic dye hold up on things like...
  2. 93-2dr-on20s

    Parting A few Silverados

    Looking for a gray fuse box cover. Either truck have the under dash cupholder?
  3. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    I guess I'll just post my progress in this thread instead of starting a separate build thread. The front end is completely put back together (FINALLY!!!). I just need to sort out the stainless brake lines. Right now they'll rub the tires when the wheels are turned all the way, they look like...
  4. 93-2dr-on20s

    4wd Hub Replacement

    Just finished doing a full front end rebuild on my truck. I must say this write up helped ALOT!!! The only issue I need to resolve is the routing of my new braided stainless brake lines. Looks like they might rub the tires in turns.
  5. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    Finally getting back on track here. All balljoints have been removed from the control arms. I took my time and drilled through all the rivets on a milling machine at work. Working in a metal shop has it's advantages, I guess. I'm having the old bushings pressed out and new ones pressed in...
  6. 93-2dr-on20s

    Newb here

    I'm thinking of just getting 2" rear shackles and keys for now. Maybe decrank the keys a bit for some slight rake (1/2"-1" tops). I kinda like the old school muscle car lean.
  7. 93-2dr-on20s

    Newb here

    Sorry 'bout that. I'll shoot some for ya (really, I will). I'm replacing balljoints, control arm bushings, hubs, calipers, rotors (drilled and slotted), stainless brake lines and possibly lowering keys and shackles (trying to convince the o/l that I need to lower it). Tie rod ends and idler arm...
  8. 93-2dr-on20s

    Newb here

    I have the e-brake on.
  9. 93-2dr-on20s

    Newb here

    Work in progress!!
  10. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    Looks like it's gonna have to wait 'till next week sometime. 12:30 appointment with the oral surgeon 2moro. Maybe I'll just stay after work a few nights untill I have them all changed.
  11. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    I tried a few things on one of the lower arms so far. I cut the head off of one rivet and tried a hammer and a punch. Yeah, right! Then I tried with an air chisel. Still nothing. Then I tried drilling halfway through it and back to the air chisel. Still nothing. I'm gonna go into work on...
  12. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    Yup riveted. I wish they were pressed in. I think they changed to press in balljoints in like '95 or '96.
  13. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    The replacement balljoints I got need to be bolted in where the rivets are now, can't just press out the lowers. I guess I'll just take my time and get the rivets out 'cause I ain't spending that much on new arms just to save myself some work. I can only imagine what a shop around here would...
  14. 93-2dr-on20s

    Source for new OBS 4X4 lower control arms?

    I apologize for the long read/rant! So I'm balls deep into rebuilding my front end. I have both sides completely torn down. The last step was removing the lower control arms so I can replace balljoints and bushings. The drivers side came apart with no problem. Released tension on the t-bars...
  15. 93-2dr-on20s

    Finally... My very own build thread.

    Nice build. Where did you find the Thorley tri-y's and Y pipe for $250?
  16. 93-2dr-on20s

    Bleeding ABS brakes

    I'm trying to find info on swapping an NBS master cylinder into my truck. I know I would need an adapter for one of the lines. Anyone have specifics on this swap, like part #'s for the NBS master cylinder and what threads do I need to adapt from/to?
  17. 93-2dr-on20s

    Bleeding ABS brakes

    http://cgi.ebay.com/ebaymotors/Motive-0105-Power-Brake-Bleeder-2-qt-CapacityGMKit-/370393304169?cmd=ViewItem&pt=Motors_Automotive_Tools&hash=item563d294c69 Got my eye on this one. I just wanted to make sure that forcing the fluid through the system won't mess up the ABS.
  18. 93-2dr-on20s

    Bleeding ABS brakes

    I'm going to be doing alot of work to my truck in the coming weeks, a complete front end rebuild and new brakes. Possibly a new master cylinder as well. I want to flush out the brake lines because I'm sure it's never been done before. Can I use a power bleeder on it without screwing up the ABS...
  19. 93-2dr-on20s

    Half shaft replacement??

    http://www.gmt400.com/forum/showthread.php?120-4wd-Hub-Replacement
  20. 93-2dr-on20s

    TBI Headers

    Looking at these. http://cgi.ebay.com/ebaymotors/Chevy-GMC-88-96-97-Truck-305-350-5-0L-5-7L-JDM-Header-/110530279385?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item19bc1e37d9
  21. 93-2dr-on20s

    TBI Headers

    Looks like I'm gonna start rebuilding my truck, so it's time to gather some parts. If anyone has any OBS TBI shorty headers laying around, let me know.
  22. 93-2dr-on20s

    Would I need to have a chip burnt?

    I hate carbs!!! Lol. Never had any luck getting a carbed motor in perfect tune. Decisions, decisions......
  23. 93-2dr-on20s

    Would I need to have a chip burnt?

    I'm really looking to do a plug and play swap with more power. I need to read up on the 5.3 and 6.0 swaps to see what exactly is involved. I don't want to break the bank, either.
  24. 93-2dr-on20s

    Would I need to have a chip burnt?

    Yeah, I figured as much. Does the ECM in a '93 control the tranny, too or is it a seperate control module? In other words, can I have the chip programmed to control my shift points, speedo etc...?
  25. 93-2dr-on20s

    Would I need to have a chip burnt?

    I got a line on a 383 stroker for cheap. Question is, would I need to have a chip burnt for it to work properly in my truck? Here are the specs I got from the seller. 9.25:1 compression ratio High performance rod bolts and nuts Performance valve springs with retainers High volume oil pump...

Latest posts

Members online

... and 3 more.
Total: 1,410 (members: 53, guests: 1,357)

Forum statistics

Threads
64,338
Messages
1,391,561
Members
51,446
Latest member
Jheer1981

Share this page

Top