Search results

  1. BOTTLEDZ28

    Escalade Center Console - $150 Columbus, IN

    If it doesnt come with the correct HVAC ducting for the Escalades/Denalis then all the heat/AC that blows out the floor vents under the center of the dash will now just blow directly into this console.
  2. BOTTLEDZ28

    14 bolt swap question

    I am currently on the hunt for a 6 lug 14 bolt. Is the Dorman backing plate listed above the direct replacement for the GMT400 6 lug 14 bolts? What about axle seals? Id like to get all the parts I need locked down prior to pulling the trigger on a junkyard rear.
  3. BOTTLEDZ28

    Buying a Tech 2 Clone... Questions...

    Has anyone been able to use one of these tech2 scanners with a 0411 swapped ECM? I need a scanner to do the power bleed and set the CMP offset. I do not trust the apps and bluetooth devices for setting CMP. I think they are too slow.
  4. BOTTLEDZ28

    98 L31 vortec 0411 swap

    The 0411 must be reprogrammed in order to work correctly on your 98. I did this swap many years ago and used a guy by the name of Lextech I believe to program the ECM for me. There are a few things that get changed out and you will have to do a minor 1 or 2 wire modification under the hood. He...
  5. BOTTLEDZ28

    WTB drivers side power window switch button (1998)

    Im looking for an OEM power window switch button for the passenger window on the drivers side switch It must be OEM, non broke or repaired and it must not be worn out like a lot of them. Its for a 1998
  6. BOTTLEDZ28

    Misfire - Cylinder 4 - Check Engine Light at 55-60 MPH acceration under load

    FWIW, I chased a random misfire for a couple years. I could feel it while driving but it never set a light. Then, it got worse and was unlocking the converter around 2K RPMS while cruising on the highway Now, If I get the truck to 85mph, the light will flash until I back out of it. I have...
  7. BOTTLEDZ28

    96 Tahoe code P 0300

    Ya, chasing a random misfire can be a PITA. I tried everything on my 98 and nothing fixed it. Im just about confident that its a cracked head now. Hope yours is just something simple. If they do decide to change out the spider injection then make sure they use the new style one from Delphi or...
  8. BOTTLEDZ28

    Steering shaft slop

    I have a 98 and Im running a custom made U joint shaft from Derek Micheal. Not sure of his screen name here. It was a drop in and go shaft and works perfect. I am also running a Redhead steering box and my steering feels tight. Truck drives near perfect and it has a 6" lift with 20x9 wheels...
  9. BOTTLEDZ28

    Steering Box

    Get one from Redhead. All the other aftermarket ones are complete garbage and dont last long. You'll be changing it out in a year All the boxes should be the same for the 1500 series trucks. The 2500 series had a bigger housing. https://redheadsteeringgears.com/product/1997-1999-gm-suv-2/
  10. BOTTLEDZ28

    New Member from RI

    I really need to do a back flush on my 98. I have good heat but it always bothers me with the Dexcool. Just have to wait until it warms up a bit. Let me know where and when you go to a junkyard. I am looking for a few odds and ends. I usually hit up Pick N Pull in Johnston. There is also one in...
  11. BOTTLEDZ28

    Oil Pressure Needle

    The only way to correct this the correct way is to install a mechanical gauge and then reinstall the needle so it matches the reading on the mechanical gauge.
  12. BOTTLEDZ28

    Best bang for buck mods to wake up vortec

    A tune and a set of gears will wake up the Burb. I suggest NOT using a cheap China spider injection setup when you do your rebuild either. Spend the money and get a Delco/Delphi one. A lot of guys skimp out here and but the $85 ebay ones and quickly regret it.
  13. BOTTLEDZ28

    Steering gear box replacement questions?

    I just put a Redhead box in and it is perfect!! money well spent
  14. BOTTLEDZ28

    2000 Crew Cab Short Box with LQ9 VortecMax Engine

    Nice rig. I love the Silverado accents on the door panels.
  15. BOTTLEDZ28

    replacing the bulbs in the dash switches????

    Does anyone know the purpose and importance of the little blue condoms GM put over the small bulbs inside the switches on the dash? Do I need to reuse them? Do they just change the color tint or do they reduce heat around the plastic?
  16. BOTTLEDZ28

    replacing the bulbs in the dash switches????

    I bought a bunch of 7219 bulbs from Amazon to do the dash switches. The ones in the steering wheel may be the same
  17. BOTTLEDZ28

    replacing the bulbs in the dash switches????

    I bought the door switch bulbs from them. Ill give it a shot and see what happens. I would have done all the bulbs but I couldnt find the 194 bulb sockets on their website.
  18. BOTTLEDZ28

    Longevity of Super Bright LEDs Inc Leds???

    Who here has used the LEDs bulbs from Super Bright Leds Inc? Rate the quality of their product. I only ask because I have seen a few post where members claimed that their LEDs only last a couple years. I am trying to replace the bulbs in my interior and I'm not sure if I want to go to LED or...
  19. BOTTLEDZ28

    replacing the bulbs in the dash switches????

    Thanks. DO you know why there is a blue condom covering the bulbs? Is is needed? Did you do the window switch bulbs at all? I cant seem to find the bulb/socket replacement for those.
  20. BOTTLEDZ28

    replacing the bulbs in the dash switches????

    Has anyone found a replacement bulb/socket for the dash switches and window switches? I know the window/lock switches use bulbs that are in a weird looking socket. Id like to replace my burnt out ones as well as replace the bulbs in the dash switches for the rear hatch, wiper and fog lights. At...
  21. BOTTLEDZ28

    Oil leak at lower intake bolt

    If the intake is still off then it would be a good time to double check valve lash. Did you end up buying a new coolant hose?
  22. BOTTLEDZ28

    I’m a newbie with some mileage

    Welcome to the group. What are your plans for fuel injection when it comes time for a new engine? With so many people doing LS swaps these days, GEN1 SBC engines and parts are priced in a budget builders favor. You could even do a TPI engine and have the wiring harness modified. TPI intakes are...
  23. BOTTLEDZ28

    Replacing Power Steering Speed Sensor

    Good to know. Thanks.
  24. BOTTLEDZ28

    5.7 to 383 poss injection upgrade

    Wow, I guess it would be safe to say that doing the Marine intake swap on these trucks AND getting the most out of it by using the 0411 would put the cost well over $1,000 if you add in the cost of the intake, new injectors, PCM, tuning and various odds and ends. At the end of the day is it...
  25. BOTTLEDZ28

    5.7 to 383 poss injection upgrade

    How much did you spend doing that swap? It seems like Marine intakes are gold around here
Top