Search results

  1. GMC GIANNI

    6.2 or 6.5 Turbo thread

    Anybody have an OBS with the Detroit Diesel? What kind of turbo setups are you running. I have a garrett into a Banks. Looking to rebuild this entire engine sometime this winter or next spring. The truck is going to be sitting over the winter months. After that I will have my hoist in state...
  2. GMC GIANNI

    Tail lights

    The dash lights work when head lights are off. the board you are all referring to is this where the bulbs plug into? those plastic pieces are pretty wrotted. both harness are good, re routed the ground which is good now. I have brand new 3057 bulbs in and nothing. when i click over the headlight...
  3. GMC GIANNI

    Tail lights

    All lights on my truck work except the tail lights. Brakes blinkers work I just dont have rear running lights. Any thoughts? Ive re routed the ground wire u der the bed to a new clean spot. Cop said they flickered when i wiggled my wiring assembly at the switch. No proof of that though.
  4. GMC GIANNI

    Dually fenders

    :33::hitit:
  5. GMC GIANNI

    Dually fenders

    I have seen this done on the c10 era trucks. Has anyone seen or is there some photos floating around the internet of someone custom fabbing rear dually fenders and using them as front fenders. I figure someone has done it for a pre runner
  6. GMC GIANNI

    350 or 327

    so i just got a 35 or a 327 gm motor im picking up on thursday the 1st. posting images once i pick it up. i didnt snap any pictures of the front code is why i say 327or 350. looking to do some upgrades but dont know where to start.
  7. GMC GIANNI

    Lowering A -1989

    For the 2500 I would definitely buy the 454 Flip kit. Axle width is larger than 1500. My 1500 kit installed had to be stretched
  8. GMC GIANNI

    FOR SALE

    Center console (blue) all pieces. Rear bench seat (blue) excellent condition. Stock scissor jack with (blue) cover. Both front seats (blue) buckets will be for sale soon. I am on the site alot. I will be adding photos. I am also sorry to post this here but I am a "newbie" and cannot post in...
  9. GMC GIANNI

    Looking for misc. pieces parts.

    i have a blue pull out cup holder i will sell you
  10. GMC GIANNI

    Bucket Seats, Adjustable Brackets, and Harness Bar - Ardent Fabrication

    Are you looking for a front bench or rear? I have the rear bench for an extended cab for sale. it is blue
  11. GMC GIANNI

    GMT400 Vehicle Dimensions

    need to find a day at work when im all by myself and print this 120 pages off. Thanks for the link!!
  12. GMC GIANNI

    De-cranking torsion bars???

    im worried about buying a set of 1500 keys and having them not work. i guess worst case i return them. I bought the 1500 flip kit.. MY MISTAKE should have bought the 454 kit to fit my rear axle. but I cut it, and re welded the housing and made it work. Its the little things i tend to overlook so...
  13. GMC GIANNI

    i think i wanna lower my truck, what's it gonna take?

    did you ever find any drop spindles that would work for your 2500 im in the same boat
  14. GMC GIANNI

    i think i wanna lower my truck, what's it gonna take?

    :bowroflwerd6:
  15. GMC GIANNI

    De-cranking torsion bars???

    but will 1/2 keys lower a 3/4 ton
  16. GMC GIANNI

    Another tire question

    nice truck. was that a 2wd? If not what kind of front suspension did it end up with
  17. GMC GIANNI

    4x4 flipped 4door tahoe questions

    I have a 4x4 2500 but it is a truck. the bolts were also close to the tank and under the body enough i couldnt pound them out. i did buy some lag bolts to replace the ones i cut. puting some gear oil on the bolts and turning them with the ratchet after you get the nuts off will let the bolt...
  18. GMC GIANNI

    2500 drop

    just looking for anybody that's dropped the 2500's. specifically 88 and 89 but all others welcome. Looking for information on what front suspension components people are running.. What had fitment issues and just an all around discussion for whoever is open to it.
  19. GMC GIANNI

    The Stupid Lowered Questions Thread

    on youtube ANDYs auto does a great video covering lowering an obs. Included is front drop for springs, flip kit, notch and a couple other keys i think but as for the flip kit and notch it is a great video. about halfway through they start the flip. With mine i did not take the bed off. i just...
  20. GMC GIANNI

    Lowering A -1989

    Got the flip kit installed
  21. GMC GIANNI

    The Stupid Lowered Questions Thread

    Also if you want clearance and do not want your rear end just bouncing anytime you run over a crack i would suggest running the c notch. as of now i am not running a cnotch and and my fifth wheel hitch would smack my rear diff if it could.
  22. GMC GIANNI

    The Stupid Lowered Questions Thread

    i believe the only leveling kit someone would have installed would be larger shackles
  23. GMC GIANNI

    DOOR SAG

    Thank you for the feedback
  24. GMC GIANNI

    DOOR SAG

    So when I was brainstorming looking at it that was the first thing that came to mind also, glad I'm not crazy.
  25. GMC GIANNI

    DOOR SAG

    So with the driver or passenger side doors in know the spring, the two pins and thats about it. On the inside of the door (this is driver side door) the top bracket that is welded to the door has been wollered out. Or for better words, the top pin has mad the hole larger. the door has new pins...

Latest posts

Staff online

Members online

... and 4 more.
Total: 1,118 (members: 54, guests: 1,064)

Forum statistics

Threads
64,734
Messages
1,399,609
Members
52,319
Latest member
shiftyshade1965

Share this page

Top