Search results

  1. Jim2029

    Voltage gauge reacts to turn signals

    1998 K1500 Suburban with the 140AMP alternator. I've noticed when sitting idle, the voltage gauge will drop a little back and forth when the turn signals are on. I haven't noticed this any other time. Alternator is less than 5 years old and the battery is new this year. Headlights are bright. No...
  2. Jim2029

    Sway bar issue with DJM control arms

    I ran the truck for that summer without a front anti-sway bar. I wasn't racing the thing and I usually do the speed limit anyways. I sold the truck off that fall... no idea what happened to it. I sold it to someone that lived near the Lansing, Mi area.
  3. Jim2029

    1995 C1500 Speakers

    They are in the door.
  4. Jim2029

    1995 C1500 Speakers

    i am an extended cab. I did go to crutchfield.com and it was giving me multiple sizes for the same spot.
  5. Jim2029

    1995 C1500 Speakers

    I did a search but only found info for 88-94. What are the speakers sizes for this truck? Front doors and rear speakers. I only have one working and its driving me nuts. Online searches is giving me multiple sizes. Thanks.
  6. Jim2029

    in line 6

    I'm thinking about doing this... But haven't found anything online. Was hoping maybe some conversion mounts are available. Everyone is LS swapping the world right now. I can show you many trucks at shows with a swapped LS in it. Its getting boring. And my truck is going to be a cruiser. I...
  7. Jim2029

    Time for a new motor

    I also had an ATK engine. I only had it for the first 15,000 miles but it ran great. No issues. Was a Vortec crate engine with a carb intake and an HEI dist.
  8. Jim2029

    355 TBI VS 383 TBI BUILD

    I'm in the early planning stages of building a new motor for my 1995 ecsb. It has a worn out 305tbi. I'm wanting to keep the stock gauges and cruse control, so I need to use the stock EFI setup. I'm getting a 350 vortec from a 1997 Tahoe. I know I'll need the vortec/tbi intake manifold. I know...
  9. Jim2029

    Jack question

    I haven't thought that far ahead. I just noticed over the weekend that my harbor fright floor jack just barely fits under the frame with 235/75R115 tires. I'll probably just get a small jack and go under the control arm/axle if I need to change a flat tire.
  10. Jim2029

    Sway bar issue with DJM control arms

    I'll just crank mine down then. I've already cut 5/8" off the tie rod end as per the instructions online. I'm getting an alignment Friday AM.
  11. Jim2029

    Sway bar issue with DJM control arms

    It was up in the air. I even compressed that side with a floor jack and it made very little difference. This is the 4" front kit (Lwr ctrl arms and coil springs). The mounts in the pictures on the site look just like this. This truck does (did) have the heavy duty RPO code for the shocks from...
  12. Jim2029

    Sway bar issue with DJM control arms

    What am I doing wrong? It seams the mounts on the lower control arm for the front sway bar link is backwards...
  13. Jim2029

    Djm suspension kits....

    Well, i got the front springs in. But now it sits lower on the driver's side than the passenger's side. Rear by 2 inches and front by 1.5 inches. Thinking maybe worn leaf springs....? The rear is lower than the front.
  14. Jim2029

    Djm suspension kits....

    So I've been installing the 4/6 drop kit with lower control arms on my 1995 ecsb since 730am... It's now 1030pm. I can't for the life of me get these coil springs in the lower control arm pockets like they should be. With the nuckle assembled there is no tension on them and they just flop around...
  15. Jim2029

    Camper cover

    This day and age.... Craigslist is just about your only option. Maybe sometimes you'll get lucky and a dealership may have some older ones sitting behind their building in the weeds.
  16. Jim2029

    Lowered Laws?

    That sucks. I'd probably mouth off to the cop and tell him he needs to get laid. Lol.
  17. Jim2029

    4/6 drop question

    Everything is powercoated.... But its flaking off the edges. It'll get all coated with SEM Rock-IT rock guard with the rest of the truck.
  18. Jim2029

    Lowered Laws?

    Yeah, as much as I like tinted lights, i'm not going to run them.
  19. Jim2029

    4/6 drop question

    Guess what showed up in the mail? Or i should say UPS brought.... The 4/6 kit is here from DJM. I warned the UPS guy... lol. Everything looks good. I get to installing it in a few weeks.
  20. Jim2029

    Lowered Laws?

    I will be 4/6 dropped on stock rallys 15" wheels from a 1974 Impala "Spirit of America Edition" on stock tire (235/75R15). Nothing dramatic, but noticeable none the less.
  21. Jim2029

    Lowered Laws?

    I'm planning a road trip from Michigan to Mississippi and Arkansas and I was trying to find the laws in the states I'll be going through about ride height. I found a few states sites about motor vehicle laws and I can't find mush an height. Mostly if you do cause damage to the road or rub your...
  22. Jim2029

    4/6 drop question

    It's in the mail!!!! I should have it Monday.
  23. Jim2029

    Couple things in Ohio

    Picture of the seats? Where in Ohio? I'm in Northern Michigan about 3.5 hours from the State Line.
  24. Jim2029

    4/6 drop question

    Update: I'm not sure about DJM suspension. My lower control arms just got to welding this morning. They are saying another week in a half before shipping. I've been waiting 3 weeks already. I'm having a bad feeling about this. I'm wanting this to be installed by Aug 17th for Woodward Dream...
  25. Jim2029

    4/6 drop question

    Well, I finally ordered the kit on June 8th. Just got a call and was told its on a 3 week back order. I won't be doing this till mid July anyways. JDM suspensions is who I went with.

Latest posts

Members online

Total: 1,054 (members: 28, guests: 1,026)

Forum statistics

Threads
64,242
Messages
1,389,571
Members
51,223
Latest member
gene ward

Share this page

Top