Search results

  1. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    Thanks for the info I’m not sure they are worth rebuilding honestly for how many posts I’ve found online saying people rebuild them and still have issues.
  2. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    Laying in bed last got to thinking the distributor did have noticeable uneven shaft wear but no side to side play I could find. I also wire brushed a lot of rust and build up off the magnets on the dizzy. Went ahead and ordered a new distributor and report back with how it does to help others...
  3. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    I do not. Currently it won’t run very long idling even with the advance timing unplugged leading me to suspect the tps
  4. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    Put a new cap and rotor in and a new coil, neither fixed the issue. Looks I’m down to wiring but I’ve been searching all over and can’t find a bad wire.
  5. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    What ended up fixing it?
  6. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    Another update. Put old icm back in and it won’t even start so I’m not sure new icm is the issue. I also replaced pickup coil at the same time is it possible pickup coil could cause this or perhaps the old ignition coil is messing with the new parts or vice versa?
  7. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    Replaced the icm they didn’t have a coil in stock and same story. New issue however driving there if I let the truck idle very long it will stumble and die even with the timing advance unplugged. How do I diagnose the coil or computer?
  8. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    I have no idea how old the coil is. I don’t wanna parts cannon this thing but is it worth getting a new coil and another icm to see if maybe it did hurt the new one?
  9. B

    Help! 89 350 tbi won’t run with timing advance plugged in.

    I had a weird intermittent problem with the truck randomly dying then sometimes restarting and sometimes not. I’ve pulled the distributor and replaced the icm and pickup coil and it already had a fairly new cap and rotor. Shaft look good and gear had no wear on it. Reinstalled now and timed to 0...
  10. B

    Looking for a 98 k1500!

    Trying to find my buddies old 1998 ext cab z71 that was an aftermarket conversion. Truck was black with green and tan decals on the side. Was lifted around 3 inches possibly with a body lift with wide I think 3 spoke style wheels. Had the molded running boards and stock flares. Also had a Lund...
  11. B

    99 yukon ignition issues help!! only source of transportation for a family

    Transfer case takes the auto track II fluid if it has the "auto 4wd" option and it is regular 3 button will take dextron 3 fluid. Do not use the dextron 6 in the transfer it's only backwards compatible with the transmissions not the t-cases. GM quit making their manual trans fluid which is what...
  12. B

    Rear Wheel Well Mud Guards

    I wonder if you could get a set for a nbs to fit with some trimming and finangling. The wheel wells look pretty similar between obs and nbs on the beds
  13. B

    Homemade torsion bar relocators

    What's the price for just straight unfinished? I can paint myself if I'll save a few bucks. I can put money down today for a set using PayPal.
  14. B

    Unusual GMT400 builds?

    Where I used to work in the oil field had a c3500hd with a 6.5 td and granny low that had a custom winch bed with I believe 20k lb hydrolic winch and A-frame poles for picking up tanks and motors. Was a cool truck but sat around so much it would need a whole can of ether to start and would...
  15. B

    Weird vibrations rough ride

    The rear of the truck will literally shift over a few inches when hitting a decent bump. Had it aligned this morning after rebuilding the front end and didn't notice it doing it hardly any driving to work. I think the steering so loose is the front in contributed a lot to letting the rear end...
  16. B

    Weird vibrations rough ride

    If I could shell out the $1000 for a full lift right now I would but I'm trying to save for my wedding and a bathroom remodel so a few hundred is all that is going to get spent on it. Again not looking for factory ride quality just want to know if anyone has come across this unusually rough ride...
  17. B

    Weird vibrations rough ride

    To clarify I still have a little room between between my upper control arm and the droop stops. I've checked over the rear end and nothing appears to be loose. His truck appears to be same specs as my suspension and I'm not sure how you tell a torsion bar is wore out without it sagging but...
  18. B

    Weird vibrations rough ride

    Also not sure if getting an add a leaf and ditching that big 3 inch block in the rear would help with the rear end wanting to kick out on bigger bumps. My buddy also used to have an 01 Silverado with his keys cranked ~3 inches and says he put the rough country 4-6 lift shocks on and it made a...
  19. B

    Weird vibrations rough ride

    So drove my truck on gravel today for the first time and had a really low vibration most of the time. I can't pinpoint it but almost sounds like it's coming from the rear. Rear end never makes any noise like bearings or gears would be bad and the g80 still works normally. The truck loves to kick...
  20. B

    My 95 K1500 Build

    I'm a freight train conductor. Please for the love of god do not mess around on tracks live or not. It's not a good place for photo shoots it's a good place to give a train crew ptsd for life man.
  21. B

    "Tina" 98 Z71 ECSB

    What's involved in changing out the ac control knobs? Just pop them off and put the 08 style on? That would look awesome with chrome door pulls on the interior
  22. B

    New Headliner and Door Fabric

    I just started redoing my door panels yesterday. First image is my terrible driver side and second is my passenger side I redid. Wrapped the insert with a vinal remnant I got from a local upholstery shop for $10. Was super easy just use some 3m spray adhesive and a blow dryer to help stretch it...
  23. B

    98 ext cab power windows both quit

    Took the driver switch out haven't had time to clean it yet. If the driver switch is out would that keep the passenger side from working? I could get the passenger side to work the first couple of seconds the switch was turned before the circuit breaker overheats but with the driver side switch...
  24. B

    HVAC Led Swap A/C not Working

    Mine is doing this exact same thing both tabs that hold it in are broke and the air only blows on my feet mostly in the middle. My A/c works but the recirc button stays on if the a/c is on. There's a connector on the back second from the left that seems messed up and had zip ties on it not...
  25. B

    Moog keys

    Probably going to have to

Latest posts

Staff online

Members online

Total: 1,419 (members: 30, guests: 1,389)

Forum statistics

Threads
64,252
Messages
1,389,886
Members
51,245
Latest member
Turbo86

Share this page

Top