Search results

  1. mutanay

    My 97 silverado

    What kind of upper control arms are those? Did they come with the Fabtech lift or can you get them separately? Been looking for chunkier control arms.
  2. mutanay

    Drive by exhaust on 350 3/4 ton

    I posted a static version of the exhaust set up i have, but this is the first time i did a drive by set up. Let me know what y'all think. Good or bad let me know, I'll listen to all of your opinions.. here she go
  3. mutanay

    Brake Lights acting funky/not working half the time

    Ill try those out to see if that works. So far my electrical in my truck has had no luck. might try the original bulbs
  4. mutanay

    Brake Lights acting funky/not working half the time

    Do the LEDs just **** the truck up? or is it just ebay crap?
  5. mutanay

    Brake Lights acting funky/not working half the time

    I bought LED lights from Ebay back in januaryish and since then there has been an issue with the lights not working when i apply the brake pedal. It will not light up as i apply pressure to the brake pedal but the moment i release some pressure and ease off the pedal while still applying the...
  6. mutanay

    The Stupid Lift Questions Thread

    Thanks found what i needed, ill be going for a 4.56 gear change
  7. mutanay

    The Stupid Lift Questions Thread

    Thanks for the advice. I was looking uo ring and pinion sets on summit racing, there was a 4.88 and a 5.13 set. Are those too much to handle? Or could i opt to getting those? Sent from my SM-G930P using Tapatalk
  8. mutanay

    The Stupid Lift Questions Thread

    It will help with acceleration but not speed? I think due to my tire size being 35 and mud terrain it will still be a slug? Sent from my SM-G930P using Tapatalk
  9. mutanay

    The Stupid Lift Questions Thread

    I have a stupid question. My 2500 has a 5.7 in it, stock with a just an intake, im running 35 inch nitto trail grapplers and i noticed when i bought the truck last year, it also had 35 inch nittos, that im literally as slow as a slug. I am wondering if i need to change my gear ratio to match the...
  10. mutanay

    Flowmaster Super 10s No Cats exhaust clip

    Thanks man Sent from my SM-G930P using Tapatalk
  11. mutanay

    Flowmaster Super 10s No Cats exhaust clip

    Here is what my 3/4 ton sounds like at the moment. Really havent done much. Wanting to get long tube headers and a limited Sent from my SM-G930P using Tapatalk
  12. mutanay

    Bad Converters

    When i got my cats removed from the muffler shop, the guy said i didnt need my o2's and that it didnt matter, I call bullshit and thats what got me upset... even if you were talking to kwslvdo96.
  13. mutanay

    Bad Converters

    O2 sensor simulators? Are those exactly how they sound? Sent from my SM-G930P using Tapatalk
  14. mutanay

    Bad Converters

    Mine threw a code instantly. It ran fine for about 2 months up until my O2 sensors recently decided to now have my truck run like ****. It cuts power, it doesnt have any throttle response at all. i am in the slow lanes all the time now. I am wanting to put maganflow direct fits back and get new...
  15. mutanay

    97 C2500 5.7 cuts out/loses power driving

    Sounds like what I am about to do. If i can get my truck running like those 10 minutes after the tune up, then I will be more than happy. Who needs a loud obnoxious truck anyway. I am cool putting the cats back in and the o2 sensor.
  16. mutanay

    97 C2500 5.7 cuts out/loses power driving

    Yeah found that out today. i did not get a tune. I wasn't aware of that when the guy told me i did not need to do anything once the cats were removed. Im thinking of just putting back the cats and screw the tune. It was indeed the O2 sensors
  17. mutanay

    97 C2500 5.7 cuts out/loses power driving

    I hope so. I would much rather have something wrong in the ignition department than fuel
  18. mutanay

    97 C2500 5.7 cuts out/loses power driving

    My word choice always sucks when i describe something. That spitting and sputtering is exactly whats happening lol. So i should check if it is the same issue?
  19. mutanay

    97 C2500 5.7 cuts out/loses power driving

    I am hoping it isn't the fuel pump, injectors or a clogged fuel line. That may be the issue. I would not know until i get it professionally check out. But it does sound like your problem is in the same ballpark as mine.
  20. mutanay

    97 C2500 5.7 cuts out/loses power driving

    Fuel pressure is at 60. Engine light has been on since i got my cats removed. Im seeing another mechanic tomorrow who will hopefully diagnose it. Im just wondering if this has happened to other people in their gmt400s. It should not be driving like this, especially after getting a tune up
  21. mutanay

    97 C2500 5.7 cuts out/loses power driving

    I came across this issue about two months ago where if i step on the gas pedal more than half way and kind of give the chevy power, it will immediately cut power and start slowing down and the engine sounds funky like its burbling if i keep on pushing farther. This especially happens while not...
  22. mutanay

    Low Beam Headlights don't work.

    I might change back to halogen soon considering everything is going out lol Sent from my SM-G930P using Tapatalk
  23. mutanay

    Low Beam Headlights don't work.

    My headlights worked up until i put LED replacements in them. They worked for about a month then one day at school the passenger low beam gave out. Im stuck on using highbeams now. Just recently my passenger highbeam is starting to give out. The bottom side of the led bulb is burnt and only the...
  24. mutanay

    LED light bar mounts!

    I ended up using a 52 inch curved from ebay with rough country 54 inch brackets. A shop near me forged the brackets to fit my 52 inch and mount it correctly. Here is my set up.. Sent from my SM-G930P using Tapatalk
  25. mutanay

    Help! K&N 3002 Oil Filter does NOT fit

    Im doing an oil change and i bought a KN 3002 oil filter for it. Not only does KN say it fits, everyone said it fits. Not mine. I have a 97 c2500 5.7. Any help here? Sent from my SM-G930P using Tapatalk

Latest posts

Staff online

Members online

... and 15 more.
Total: 1,534 (members: 65, guests: 1,469)

Forum statistics

Threads
64,306
Messages
1,391,048
Members
51,377
Latest member
Kc3889

Share this page

Top