Search results

  1. Vodka0tter

    Holley Terminator X EFI

    Truck is a '97, 383 vortec base. I wired up an Edelbrock Pro-Flow MPFI which is working fine, 0411 PCM. I have hacked into the wiring harness so many times now, I cant believe it still runs? No A/C, EGR, Cruise, Antilock, airbags, T56 swapped... Pretty basic at this point and everything removed...
  2. Vodka0tter

    ABS delete

    The pedal in my '97 RCSB still is pretty poor IMO. Pretty significant travel before the brakes engage, soft after engagement and improves with a pump or two. I put little shop rear disc, disc proportioning valve, NBS master cyl, new booster, all new lines & SS hoses, Little shop front set up...
  3. Vodka0tter

    Neutral Safety Switch bypass

    Yeah, think its purple (starter relay) from the fuse block under the hood and Yellow (Ignition wire) wire from the steering column. I know the purple goes to the solenoid.
  4. Vodka0tter

    Neutral Safety Switch bypass

    I did a trans swap from auto to manual in my '97 RCSB. Started this almost 2 yrs ago, things got in the way but wrapping it up now. When I removed the auto, I chased all the wires back to the PCM and unpinned them. So I know I have a NSS problem because I removed the wiring. I'll tie this into...
  5. Vodka0tter

    2002 sunvisors in 98 Burb

    Glad I found this thread. My 99 tahoe is getting an up grade soon! I have the MGT800 visors, was just stuck on the install...
  6. Vodka0tter

    02 sensor/ENG1 fuse circuit. Elect Gurus - help please!

    Perfect! It’s 12.2. thanks for the help guys, appreciate it!!
  7. Vodka0tter

    02 sensor/ENG1 fuse circuit. Elect Gurus - help please!

    So pink hot from the fuse box should show ground if it’s the heater circuit on an o2 sensor? Also grounds out all other circuits on that buss bar. Seems odd but I know little about circuitry
  8. Vodka0tter

    02 sensor/ENG1 fuse circuit. Elect Gurus - help please!

    It is part of the heater circuit...
  9. Vodka0tter

    02 sensor/ENG1 fuse circuit. Elect Gurus - help please!

    I am not sure if I have a problem or not. I went in for a tune this spring and the tuner guy says your odbii is dead. I locate what I think are 2 shorts in my wiring. 1 in the cab - I have located that one. While looking at the power dist. box (fuse box under the hood) I note that many of my...
  10. Vodka0tter

    Under hood Power distribution block power

    okay - thanks. I am chasing a short down that started with the power to the ODBii showing a short in the orange power supply to it (ODB is not powering a code reader or providing power to for tune). I found ground faults in two places that show hot to hot to ground. I jump the batty leg from...
  11. Vodka0tter

    Under hood Power distribution block power

    Stupid question... Regarding the power distribution block under the hood, what source is the 50 A fuse labeled Betty? Is that a direct feed from the batty, the main power supply?
  12. Vodka0tter

    Aftermarket gauges?

    Well, obviously I have no idea how to show a picture from my media...
  13. Vodka0tter

    Aftermarket gauges?

    0tters dash by Vodka0tter posted Jul 11, 2019 at 6:18 PM Aerometer mounted on a cut sheet of plastic 0tters dash by Vodka0tter posted Jul 11, 2019 at 6:18 PM
  14. Vodka0tter

    Gotta love those 4L60E's(insert sarcasm)

    I push ~ 500 hp out of my 383 into a 60E (and a 10 bolt for that matter). They both see action with 10" slicks putting my yank 3200 stall to work. While mine is not DD I gotta say an ounce of prevention goes a long way in quality parts and maint (fluids, filters, cooler, frequent inspections)...
  15. Vodka0tter

    97 1500 steering box replacement

    https://www.amazon.com/Universal-Steering-Joint-Stainless-Steel/dp/B00VA0YGT0 Just make sure you match the spline count and dia.
  16. Vodka0tter

    97 1500 steering box replacement

    I installed a AGR 12:1 quick steer and pitched the rag joint for a U joint. Night and day...
  17. Vodka0tter

    Ridetech Wishbone coilover rear set up

    Anyone install Ridetech's rear wishbone set up yet? I was going to make up a 4-bar set up but am considering this as an alternative. I would assume the wishbone would outperform a 4 bar but looking for some 1st hand feedback...
  18. Vodka0tter

    Wynjammer 63lb injector spider

    yep
  19. Vodka0tter

    Daily truck pics

    IMG_0112 by Vodka0tter posted Jul 3, 2019 at 9:11 PM Back by Vodka0tter posted Jul 19, 2019 at 5:49 PM Engine Bay by Vodka0tter posted Jul 19, 2019 at 5:49 PM 0tters dash by Vodka0tter posted Jul 11, 2019 at 6:18 PM
  20. Vodka0tter

    brake line question

    I would cut all the fitting off and re-flare the lines with the correct size (3/16 most likely?)
  21. Vodka0tter

    brake line question

    Replace the line Bent to fit as you see fit. I've been there as well. I ended up removing the ABS also after trying to bleed this POS system and since my truck had some 360,000 I decided to replace all the lines and hoses. After pulling the rears out I am damn sure glad I did. I know thats a...
  22. Vodka0tter

    Front end overhaul

    Dont forget to check the condition of the steering shaft rag joint.
  23. Vodka0tter

    electric cooling fan help...

    My electric fans are rarely on as well. This year has not been bad but even n triple dig I still didn't notice the fans unless I was running in light to light traffic. Also opens up the engine bay a lot. I dont think the butt dyno will ever notice the difference, more a personal choice for many...
  24. Vodka0tter

    Alternator excite wire

    Thanks for all the input. I decided to just wire in the idiot lamp into the new dash so problem fixed! The dash is a fabrication so no one to question but my self ;) 0tters dash by Vodka0tter posted Jul 11, 2019 at 6:18 PM
  25. Vodka0tter

    The Member Truck Thread

    Diggin the Sierra!

Latest posts

Members online

... and 17 more.
Total: 1,509 (members: 67, guests: 1,442)

Forum statistics

Threads
64,229
Messages
1,389,172
Members
51,170
Latest member
Chase33

Share this page

Top